2013 Audi S5 Wheel Interchange

OEM wheel/tire sizes and fitment specs for the 2013 Audi S5.

Understanding Wheel Fitment for Your 2013 Audi S5

Many car owners believe that any set of wheels will fit their vehicle without any issues. This misconception can lead to costly mistakes and safety concerns. Let's clarify the facts about wheel fitment for your 2013 Audi S5 step by step.

Why This Misconception Seems True

It might seem like wheel fitment is straightforward. After all, many wheels look similar, and the specifications can often be confusing. Plus, some sellers might not provide detailed information, which can make it easy to assume that any wheel will work as long as it fits the bolt pattern.

What Is True

For your 2013 Audi S5, the known OEM specifications are quite specific:

  • Bolt pattern: 5x112
  • Center bore: 66.6 mm
  • Thread size: M14 x 1.5
  • Rim diameter: 20 inches
  • Rim width: 9.0 inches
  • Wheel offset: 29 mm
  • Backspacing: 5.64 inches
  • Tire section width: 245 mm
  • Tire aspect ratio: 40%
  • Tire rim diameter: 18 inches

It’s important to ensure that any wheels you consider conform to these specifications. If they don’t, you might face fitment issues, which can affect handling and safety.

Implications of Incorrect Fitment

Using wheels that don’t match your Audi S5’s specifications can lead to various problems. These can include compromised safety, poor handling, increased tire wear, and even damage to your vehicle. Think of it as setting your car up for performance; every part needs to work in harmony.

Quick Tests to Ensure Proper Fitment

Here are a few quick tests you can perform:

  • Check the bolt pattern: Ensure the wheels have a 5x112 configuration.
  • Verify the center bore: Make sure it matches 66.6 mm for a snug fit.
  • Confirm the thread size: Look for M14 x 1.5 to prevent issues during installation.
  • Use our wheel fitment calculator to compare any custom sizes.

By taking these steps, you’ll feel more confident in your wheel choices. If you're ever in doubt, always refer back to the OEM specifications or check with reliable sources.

Additional Resources

If you're looking for tools or parts for wheel installation, check out these links:

In conclusion, understanding the specific fitment requirements for your 2013 Audi S5 can prevent mistakes and enhance your driving experience. Always double-check your specs and consider using the available tools for the best results. You're on the right track!

Select Cars for Wheel Swap

Compare wheel compatibility between two vehicles

Wheels from (donor vehicle)

Installed on (your vehicle)

Selected Car:

Audi S5 2013

Compare Rims

Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x4.41 / 5x112
Center Bore
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
66.5mm
Thread Size
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M14 x 1.5
Rim Diameter
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
18"
Rim Width
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
8.5"
Wheel Offset
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
29mm
Backspacing
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
5.39"
Wheel Fasteners
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
Lug bolts

Compare Tires

Specification
Wheels from
Installed on
Result (Click it)
Section Width
The width of the tire from sidewall to sidewall, measured in millimeters.
-
245 mm
Aspect Ratio
The height of the tire’s sidewall expressed as a percentage of its width.
-
40%
Diameter
The wheel diameter for which the tire is designed to fit.
-
R18
Tire Pressure
The recommended air pressure for safe and efficient driving.
-
2.6 BAR / 37.7 PSI
Overall Diameter
The total height of the tire and wheel combined affects clearance and speedometer accuracy.
-
25.72" (653.2 mm)