OEM wheel and tire fitment specs for the 2015 Aston Martin Rapide S, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.
Recorded OEM specifications for the 2015 Aston Martin Rapide S, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.
Center-bore records disagree: year-level hub 68.1 mm vs trim range 75.1–75.1 mm. Interchange below does not treat this as an unqualified match.
Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.
Donor vehicles with overlapping OEM specs
These are vehicle-year records whose recorded OEM ranges overlap this 2015 Aston Martin Rapide S. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.
Evaluated 5 donor years. Listed 5 eligible overlaps (not all evaluated years are compatible). Showing all listed.
Wheel geometryOEM width/offset ranges overlap (not a specific wheel)
Center-bore records disagree (target year-level hub 68.1 mm vs trim range 75.1–75.1 mm; donor year-level hub 68.1 mm vs trim range 75.1–75.1 mm). Unqualified overlap is not claimed until the conflict is resolved.
Compare a donor vehicle or custom wheel against this 2015 Aston Martin Rapide S. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.
Compare
Compare wheel compatibility between two vehicles
Wheels from (donor vehicle)
Selected Car:
Custom wheel size (optional)
Tip: change values here to simulate custom wheels and immediately see the impact in the comparison below.
Custom tire size (optional)
Installed on (your vehicle)
Selected Car:
2015 Aston Martin Rapide S
Compare Rims
Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x128
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
75.1 mm
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M14 x 2.00
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
20"
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
8.5"
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
42 mm
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-
Compare Tires
Specification
Wheels from
Installed on
Result (Click it)
Section Width
The width of the tire from sidewall to sidewall, measured in millimeters.
-
-
Aspect Ratio
The height of the tire’s sidewall expressed as a percentage of its width.
-
-
Diameter
The wheel diameter for which the tire is designed to fit.
-
-
Tire Pressure
The recommended air pressure for safe and efficient driving.
-
-
Overall Diameter
The total height of the tire and wheel combined affects clearance and speedometer accuracy.
-
-
Wheel Fitment Parts for the 2015 Aston Martin Rapide S
Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.
As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.
2015 Aston Martin Rapide S Wheel Fitment
Bolt Pattern
5x128
Center Bore
75.1 mm
Thread Size
M14 x 2.00
Rim Diameter
20"
Rim Width
8.5"
Wheel Offset
42 mm
Use the calculator below to compare wheels from another vehicle against your 2015 Aston Martin Rapide S, or check compatible donor vehicles that share the same bolt pattern and center bore.
Fitment Basics
Always confirm center bore matches your hub, or use hub-centric rings to take up the gap.
Check offset carefully – wheels that stick out too far can rub on fenders or suspension components.
Verify thread size and lug type before buying replacement bolts or lug nuts.
When in doubt, use the calculator below to compare exact specs side by side.
Methodology and sources
Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:
Bolt pattern / PCD
Center bore direction (donor wheel bore must not be smaller than the hub)
Wheel diameter, width, and offset against known OEM ranges
A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.