TSW
Sebring
Black
18 × 8.5″ · ET +20
$319.00
View at Tire Rack ↗2000 BMW Z8 Wheel Interchange
OEM wheel and tire fitment specs for the 2000 BMW Z8, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.
Recorded OEM specifications for the 2000 BMW Z8, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.
Save these wheel specs to your Ownery garage
2000 BMW Z8 Fitment Specs
Baseline mounting dimensions used for interchange decisions.
Bolt Pattern5x120
Center Bore72.6 mm
Lug ThreadM12 x 1.5 View M12 x 1.5 options on Amazon
OEM Wheel Sizes18"
OEM Widths8"
OEM Offset Range20 mm
Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.
Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.
Explore wheels at Tire Rack
Selected size: 18 × 8″ · ET +20
Showing matching bolt patterns and offsets up to 30 mm lower. Confirm center bore, load rating, and clearance at Tire Rack.
We may earn a commission when you buy through these links. Prices and availability may change.
Donor vehicles with overlapping OEM specs
These are vehicle-year records whose recorded OEM ranges overlap this 2000 BMW Z8. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.
Evaluated 95 donor years. Listed 24 eligible overlaps (not all evaluated years are compatible). Showing all listed.
2001–2003 BMW Z8
OEM specs overlapOEM ranges overlap – confirm the specific wheel
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
- Bolt pattern5x120 · Same recorded PCD
- Center bore72.6 mm · same recorded hub figure
- Wheel geometryOEM width/offset ranges overlap (not a specific wheel)
Recorded OEM bolt pattern, center bore, and width/offset ranges overlap. This is not a guarantee that every wheel from the donor year fits this vehicle.
2008–2013 BMW M3
OEM specs overlapOEM ranges overlap – confirm the specific wheel
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
- Bolt pattern5x120 · Same recorded PCD
- Center bore72.6 mm · same recorded hub figure
- Wheel geometryOEM width/offset ranges overlap (not a specific wheel)
Recorded OEM bolt pattern, center bore, and width/offset ranges overlap. This is not a guarantee that every wheel from the donor year fits this vehicle.
2006–2010 BMW M5
OEM specs overlapOEM ranges overlap – confirm the specific wheel
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
- Bolt pattern5x120 · Same recorded PCD
- Center bore72.6 mm · same recorded hub figure
- Wheel geometryOEM width/offset ranges overlap (not a specific wheel)
Recorded OEM bolt pattern, center bore, and width/offset ranges overlap. This is not a guarantee that every wheel from the donor year fits this vehicle.
2006 BMW X5
Check wheel configurationCheck lug hardware: donor year M14x1.5 vs 2000 BMW Z8 M12x1.5
- Bolt pattern5x120 · Same recorded PCD
- Center bore74.1 mm donor vs hub 72.6 mm
- Wheel geometryNeeds configuration check
Recorded vehicle-side thread for the 2000 BMW Z8 is M12x1.5. This donor year is recorded as M14x1.5. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.
Dataset suggestionHub-centric rings ≈ 74.1 → 72.6 mm – not a verified installation requirement.
Hub-centric rings of about 74.1 → 72.6 mm mm may be relevant if the wheel bore is larger than the hub; clearance is not verified. Donor width/offset sits outside the known OEM envelope for this vehicle.
2009–2016 BMW Z4
Check wheel configurationGeometry suggestion only; clearance unverified
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
- Bolt pattern5x120 · Same recorded PCD
- Center bore72.6 mm · same recorded hub figure
- Wheel geometryOutside recorded OEM envelope
Dataset suggestionWheel spacer ≈ 9 mm – not a verified installation requirement.
A spacer of about 9 mm is a dataset suggestion only; clearance is not verified. Estimated outer position is about 9 mm farther inward than the mid OEM package.
2016 BMW M2
Check wheel configurationCheck lug hardware: donor year M14x1.25 vs 2000 BMW Z8 M12x1.5
- Bolt pattern5x120 · Same recorded PCD
- Center bore72.6 mm · same recorded hub figure
- Wheel geometryNeeds configuration check
Recorded vehicle-side thread for the 2000 BMW Z8 is M12x1.5. This donor year is recorded as M14x1.25. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.
Donor width/offset sits outside the known OEM envelope for this vehicle. Recorded vehicle-side thread differs (M14x1.25 on the donor year vs M12x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset.
BMW Z8 Years With Compatible Wheels
Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.
Will Wheels From Another Vehicle Fit?
Compare a donor vehicle or custom wheel against this 2000 BMW Z8. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.
Compare
Compare wheel compatibility between two vehicles
Wheels from (donor vehicle)
Installed on (your vehicle)
Selected Car:
2000 BMW Z8
Compare Rims
Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x120
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
72.6 mm
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M12 x 1.5
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
18"
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
8.0"
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
20 mm
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-
Wheel Fitment Parts for the 2000 BMW Z8
Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.
Lug Nuts / Wheel Bolts
M12 x 1.5
White Knight Chrome M12x1.50 Bulge Acorn Lug Nut, 20 Count
M12 x 1.5 · Thread match only; seat style is not verified
View on Amazon →
White Knight 3807BK-20AM Black Chrome M12x1.50 Spline Lug Nut, 20 items
M12 x 1.5 · Thread match only; seat style is not verified
View on Amazon →
White Knight 3807XL-25AM Chrome M12x1.50 Lug Nuts
M12 x 1.5 · Thread match only; seat style is not verified
View on Amazon →As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.
2000 BMW Z8 Wheel Fitment
| Bolt Pattern | 5x120 |
|---|---|
| Center Bore | 72.6 mm |
| Thread Size | M12 x 1.5 |
| Rim Diameter | 18" |
| Rim Width | 8.0" |
| Wheel Offset | 20 mm |
Use the calculator below to compare wheels from another vehicle against your 2000 BMW Z8, or check compatible donor vehicles that share the same bolt pattern and center bore.
Fitment Basics
- Always confirm center bore matches your hub, or use hub-centric rings to take up the gap.
- Check offset carefully – wheels that stick out too far can rub on fenders or suspension components.
- Verify thread size and lug type before buying replacement bolts or lug nuts.
- When in doubt, use the calculator below to compare exact specs side by side.
Methodology and sources
Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:
- Bolt pattern / PCD
- Center bore direction (donor wheel bore must not be smaller than the hub)
- Wheel diameter, width, and offset against known OEM ranges
- Lug thread / hardware differences (vehicle-side hardware)
A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.
