Ferrari 488 Spider Wheel Interchange
Compare Ferrari 488 Spider wheel specifications across 1 model year. Review bolt patterns, center bore, thread size, OEM wheel dimensions, and the years that share the same recorded mounting specs.
On this page
Compare Ferrari 488 Spider Years
Wheel Specifications by Year
| Year | Bolt pattern | Center bore | Thread size | OEM rim sizes | Offset | Details |
|---|---|---|---|---|---|---|
| 2019 | 5×114.3 | 67.1 mm | M14×1.5 | 20×9 | 44 mm | Open 2019 page |
2019
- Bolt pattern
- 5×114.3
- Center bore
- 67.1 mm
- Thread size
- M14×1.5
- OEM rim sizes
- 20×9
- Offset
- 44 mm
- Details
- Open 2019 page
Is matching bolt pattern enough?
A matching Ferrari 488 Spider bolt pattern is only the first check. The wheel still has to clear the hub, brakes, and suspension, sit at a usable offset, and use the correct fasteners and tire package.
- Center bore must not be smaller than the hub. A larger bore may need hub-centric rings; it is not an automatic fit.
- Offset and backspacing change inner and outer clearance even when diameter matches.
- Wheel width, brake clearance, and suspension travel are trim-specific and are not proven by bolt pattern alone.
- Lug-seat geometry, thread size, load rating, tire diameter, and TPMS compatibility still need a physical check.
Same recorded specifications are a candidate for further verification, not confirmation that wheels physically fit.
Frequently Asked Questions
What bolt patterns has the Ferrari 488 Spider used?
Recorded Ferrari 488 Spider bolt patterns for 2019 are 5×114.3. A year may have more than one configuration, so confirm the year page before buying wheels.
Do all 488 Spider years use the same wheel specs?
This page currently covers one published 488 Spider year. Open that year page for the recorded wheel specifications.
How can I compare two 488 Spider years?
Use Compare Years at the top of this page to select a donor year and an installed-on year. The result compares recorded bolt pattern, center bore, thread size, rim diameter, rim width, offset, backspacing, and tire size, then links to both year pages and the wheel calculator.
Is matching the bolt pattern enough?
No. Matching bolt pattern alone is not enough. Center bore, offset, backspacing, wheel width, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility must still be verified.
What should I check before installing wheels from another year?
Confirm the recorded core mounting specs, then verify wheel width, offset/backspacing, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility. This page reports recorded specifications and does not certify installation.