Ferrari SF90 Stradale Wheel Interchange
Compare Ferrari SF90 Stradale wheel specifications across 2 model years. Review OEM wheel dimensions.
On this page
Compare Ferrari SF90 Stradale Years
Wheel Specifications by Year
| Year | Bolt pattern | Center bore | Thread size | OEM rim sizes | Offset | Details |
|---|---|---|---|---|---|---|
| 2022 | Not available | Not available | Not available | 20×9.5 | 0 mm | Open 2022 page |
| 2020 | Not available | Not available | Not available | 20×9.5 | 0 mm | Open 2020 page |
2022
- Bolt pattern
- Not available
- Center bore
- Not available
- Thread size
- Not available
- OEM rim sizes
- 20×9.5
- Offset
- 0 mm
- Details
- Open 2022 page
2020
- Bolt pattern
- Not available
- Center bore
- Not available
- Thread size
- Not available
- OEM rim sizes
- 20×9.5
- Offset
- 0 mm
- Details
- Open 2020 page
Is matching bolt pattern enough?
A matching Ferrari SF90 Stradale bolt pattern is only the first check. The wheel still has to clear the hub, brakes, and suspension, sit at a usable offset, and use the correct fasteners and tire package.
- Center bore must not be smaller than the hub. A larger bore may need hub-centric rings; it is not an automatic fit.
- Offset and backspacing change inner and outer clearance even when diameter matches.
- Wheel width, brake clearance, and suspension travel are trim-specific and are not proven by bolt pattern alone.
- Lug-seat geometry, thread size, load rating, tire diameter, and TPMS compatibility still need a physical check.
Same recorded specifications are a candidate for further verification, not confirmation that wheels physically fit.
Frequently Asked Questions
Do all SF90 Stradale years use the same wheel specs?
No. Recorded SF90 Stradale wheel specifications change across model years. Use the year comparison tool and the specifications table on this page.
How can I compare two SF90 Stradale years?
Use Compare Years at the top of this page to select a donor year and an installed-on year. The result compares recorded bolt pattern, center bore, thread size, rim diameter, rim width, offset, backspacing, and tire size, then links to both year pages and the wheel calculator.
Is matching the bolt pattern enough?
No. Matching bolt pattern alone is not enough. Center bore, offset, backspacing, wheel width, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility must still be verified.
What should I check before installing wheels from another year?
Confirm the recorded core mounting specs, then verify wheel width, offset/backspacing, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility. This page reports recorded specifications and does not certify installation.