OEM wheel and tire fitment specs for the 2009 Kia Sedona, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.
2009 Kia Sedona Fitment Specs
Baseline mounting dimensions used for interchange decisions.
Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.
Wheels That Interchange With a 2009 Kia Sedona
Results are evaluated from bolt pattern, center bore direction, OEM width/offset envelope, and lug hardware – not bolt pattern alone.
A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.
2009 Kia Sedona Wheel Fitment
Bolt Pattern
6x139.7
Center Bore
92.2 mm
Thread Size
M12 x 1.5
Rim Diameter
16"
Rim Width
6.5"
Wheel Offset
46 mm
Use the calculator below to compare wheels from another vehicle against your 2009 Kia Sedona, or check compatible donor vehicles that share the same bolt pattern and center bore.
Fitment Basics
Always confirm center bore matches your hub, or use hub-centric rings to take up the gap.
Check offset carefully – wheels that stick out too far can rub on fenders or suspension components.
Verify thread size and lug type before buying replacement bolts or lug nuts.
When in doubt, use the calculator below to compare exact specs side by side.