McLaren 675LT Wheel Interchange
Compare McLaren 675LT wheel specifications across 1 model year. Review bolt patterns.
On this page
Compare McLaren 675LT Years
Wheel Specifications by Year
| Year | Bolt pattern | Center bore | Thread size | OEM rim sizes | Offset | Details |
|---|---|---|---|---|---|---|
| 2016 | 5×112 | Not available | Not available | Not available | Not available | Open 2016 page |
2016
- Bolt pattern
- 5×112
- Center bore
- Not available
- Thread size
- Not available
- OEM rim sizes
- Not available
- Offset
- Not available
- Details
- Open 2016 page
Is matching bolt pattern enough?
A matching McLaren 675LT bolt pattern is only the first check. The wheel still has to clear the hub, brakes, and suspension, sit at a usable offset, and use the correct fasteners and tire package.
- Center bore must not be smaller than the hub. A larger bore may need hub-centric rings; it is not an automatic fit.
- Offset and backspacing change inner and outer clearance even when diameter matches.
- Wheel width, brake clearance, and suspension travel are trim-specific and are not proven by bolt pattern alone.
- Lug-seat geometry, thread size, load rating, tire diameter, and TPMS compatibility still need a physical check.
Same recorded specifications are a candidate for further verification, not confirmation that wheels physically fit.
Frequently Asked Questions
What bolt patterns has the McLaren 675LT used?
Recorded McLaren 675LT bolt patterns for 2016 are 5×112. A year may have more than one configuration, so confirm the year page before buying wheels.
Do all 675LT years use the same wheel specs?
This page currently covers one published 675LT year. Open that year page for the recorded wheel specifications.
How can I compare two 675LT years?
Use Compare Years at the top of this page to select a donor year and an installed-on year. The result compares recorded bolt pattern, center bore, thread size, rim diameter, rim width, offset, backspacing, and tire size, then links to both year pages and the wheel calculator.
Is matching the bolt pattern enough?
No. Matching bolt pattern alone is not enough. Center bore, offset, backspacing, wheel width, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility must still be verified.
What should I check before installing wheels from another year?
Confirm the recorded core mounting specs, then verify wheel width, offset/backspacing, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility. This page reports recorded specifications and does not certify installation.