2020 Mercedes-Benz Mercedes-Benz GLA 250 Wheel Interchange

OEM wheel and tire fitment specs for the 2020 Mercedes-Benz Mercedes-Benz GLA 250, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.

2020 Mercedes-Benz Mercedes-Benz GLA 250 Fitment Specs

Baseline mounting dimensions used for interchange decisions.

Bolt PatternNot fully verified in current dataset
Center BoreNot fully verified in current dataset
Lug ThreadNot fully verified in current dataset
OEM Wheel SizesNot fully verified in current dataset
OEM WidthsNot fully verified in current dataset
OEM Offset RangeNot fully verified in current dataset

Wheels That Interchange With a 2020 Mercedes-Benz Mercedes-Benz GLA 250

Results are evaluated from bolt pattern, center bore direction, OEM width/offset envelope, and lug hardware – not bolt pattern alone.

Check Fitment

2019 Mercedes-Benz Mercedes-Benz GLA 250

Check Fitment
  • Bolt patternNot fully verified
  • Center boreNot fully verified
  • Wheel geometryNot fully verified

Bolt pattern data is incomplete for a full interchange decision.

2021 Mercedes-Benz Mercedes-Benz GLA 250

Check Fitment
  • Bolt patternNot fully verified
  • Center boreNot fully verified
  • Wheel geometryNot fully verified

Bolt pattern data is incomplete for a full interchange decision.

2018 Mercedes-Benz Mercedes-Benz GLA 250

Check Fitment
  • Bolt patternNot fully verified
  • Center boreNot fully verified
  • Wheel geometryNot fully verified

Bolt pattern data is incomplete for a full interchange decision.

Mercedes-Benz Mercedes-Benz GLA 250 Years With Compatible Wheels

Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.

Will Wheels From Another Vehicle Fit?

Compare a donor vehicle or custom wheel against this 2020 Mercedes-Benz Mercedes-Benz GLA 250.

Compare

Compare wheel compatibility between two vehicles

Wheels from (donor vehicle)

Installed on (your vehicle)

Selected Car:

2020 Mercedes-Benz Mercedes-Benz GLA 250

Compare Rims

Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
-
Center Bore
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
-
Thread Size
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
-
Rim Diameter
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
-
Rim Width
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
-
Wheel Offset
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
-
Backspacing
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-

Why These Wheels Fit

Wheel interchange depends on more than bolt pattern. Where data is available, this site compares:

  • Bolt pattern / PCD
  • Center bore direction (donor wheel bore must not be smaller than the hub)
  • Wheel diameter, width, and offset against known OEM ranges
  • Lug thread / hardware differences (vehicle-side hardware)

A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.

2020 Mercedes-Benz Mercedes-Benz GLA 250 Wheel Fitment

Bolt PatternNot specified – check via calculator
Center BoreNot specified – check via calculator
Thread SizeNot specified – check via calculator
Rim DiameterNot specified – check via calculator
Rim WidthNot specified – check via calculator
Wheel OffsetNot specified – check via calculator

Use the calculator below to compare wheels from another vehicle against your 2020 Mercedes-Benz Mercedes-Benz GLA 250, or check compatible donor vehicles that share the same bolt pattern and center bore.

Fitment Basics

  • Always confirm center bore matches your hub, or use hub-centric rings to take up the gap.
  • Check offset carefully – wheels that stick out too far can rub on fenders or suspension components.
  • Verify thread size and lug type before buying replacement bolts or lug nuts.
  • When in doubt, use the calculator below to compare exact specs side by side.

Nick Marchenko

Automotive Expert