Nissan R31-R34 Skyline 2dr Wheel Interchange

Compare Nissan R31-R34 Skyline 2dr wheel specifications across 10 model years. Review bolt patterns, center bore, thread size, and the years that share the same recorded mounting specs.

Years covered1989–1999

Published years10

Bolt patterns found5×114.3

Center bores found66.1 mm

Thread sizes foundM12×1.25

On this page

Compare Nissan R31-R34 Skyline 2dr Years

Wheel Specifications by Year

Year	Bolt pattern	Center bore	Thread size	OEM rim sizes	Offset	Details
1999	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1999 page
1998	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1998 page
1997	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1997 page
1996	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1996 page
1995	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1995 page
1994	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1994 page
1992	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1992 page
1991	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1991 page
1990	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1990 page
1989	5×114.3	66.1 mm	M12×1.25	Not available	Not available	Open 1989 page

1999

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1999 page

1998

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1998 page

1997

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1997 page

1996

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1996 page

1995

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1995 page

1994

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1994 page

1992

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1992 page

1991

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1991 page

1990

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1990 page

1989

Bolt pattern: 5×114.3
Center bore: 66.1 mm
Thread size: M12×1.25
OEM rim sizes: Not available
Offset: Not available
Details: Open 1989 page

Nissan R31-R34 Skyline 2dr Years With the Same Recorded Mounting Specs

1989–1992, 1994–1999

5×114.3 · 66.1 mm · M12×1.25

These years share the same recorded core mounting specs. Wheel diameter, width, offset, brake clearance, and load rating must still be checked.

Is matching bolt pattern enough?

A matching Nissan R31-R34 Skyline 2dr bolt pattern is only the first check. The wheel still has to clear the hub, brakes, and suspension, sit at a usable offset, and use the correct fasteners and tire package.

Center bore must not be smaller than the hub. A larger bore may need hub-centric rings; it is not an automatic fit.
Offset and backspacing change inner and outer clearance even when diameter matches.
Wheel width, brake clearance, and suspension travel are trim-specific and are not proven by bolt pattern alone.
Lug-seat geometry, thread size, load rating, tire diameter, and TPMS compatibility still need a physical check.

Same recorded specifications are a candidate for further verification, not confirmation that wheels physically fit.

Frequently Asked Questions

What bolt patterns has the Nissan R31-R34 Skyline 2dr used?

Recorded Nissan R31-R34 Skyline 2dr bolt patterns for 1989–1999 are 5×114.3. A year may have more than one configuration, so confirm the year page before buying wheels.

Do all R31-R34 Skyline 2dr years use the same wheel specs?

The published R31-R34 Skyline 2dr years on this page share the same recorded core mounting specs (5×114.3 · 66.1 mm · M12×1.25). Wheel diameter, width, offset, brake clearance, and load rating must still be checked.

How can I compare two R31-R34 Skyline 2dr years?

Use Compare Years at the top of this page to select a donor year and an installed-on year. The result compares recorded bolt pattern, center bore, thread size, rim diameter, rim width, offset, backspacing, and tire size, then links to both year pages and the wheel calculator.

Is matching the bolt pattern enough?

No. Matching bolt pattern alone is not enough. Center bore, offset, backspacing, wheel width, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility must still be verified.

What should I check before installing wheels from another year?

Confirm the recorded core mounting specs, then verify wheel width, offset/backspacing, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility. This page reports recorded specifications and does not certify installation.