Scion iM Wheel Interchange
Compare Scion iM wheel specifications across 1 model year. Review bolt patterns, center bore, thread size, OEM wheel dimensions, and the years that share the same recorded mounting specs.
On this page
Compare Scion iM Years
Wheel Specifications by Year
| Year | Bolt pattern | Center bore | Thread size | OEM rim sizes | Offset | Details |
|---|---|---|---|---|---|---|
| 2016 | 5×114.3 | 60.1 mm | M12×1.5 | Varies
| Varies
| Open 2016 page |
2016
- Bolt pattern
- 5×114.3
- Center bore
- 60.1 mm
- Thread size
- M12×1.5
- OEM rim sizes
Varies
- 17×7
- 18×7.5
- 18×8
- 19×7.5
- 19×9
- Offset
Varies
- 38 mm
- 45 mm
- 48 mm
- 50 mm
- Details
- Open 2016 page
Is matching bolt pattern enough?
A matching Scion iM bolt pattern is only the first check. The wheel still has to clear the hub, brakes, and suspension, sit at a usable offset, and use the correct fasteners and tire package.
- Center bore must not be smaller than the hub. A larger bore may need hub-centric rings; it is not an automatic fit.
- Offset and backspacing change inner and outer clearance even when diameter matches.
- Wheel width, brake clearance, and suspension travel are trim-specific and are not proven by bolt pattern alone.
- Lug-seat geometry, thread size, load rating, tire diameter, and TPMS compatibility still need a physical check.
Same recorded specifications are a candidate for further verification, not confirmation that wheels physically fit.
Frequently Asked Questions
What bolt patterns has the Scion iM used?
Recorded Scion iM bolt patterns for 2016 are 5×114.3. A year may have more than one configuration, so confirm the year page before buying wheels.
Do all iM years use the same wheel specs?
This page currently covers one published iM year. Open that year page for the recorded wheel specifications.
How can I compare two iM years?
Use Compare Years at the top of this page to select a donor year and an installed-on year. The result compares recorded bolt pattern, center bore, thread size, rim diameter, rim width, offset, backspacing, and tire size, then links to both year pages and the wheel calculator.
Is matching the bolt pattern enough?
No. Matching bolt pattern alone is not enough. Center bore, offset, backspacing, wheel width, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility must still be verified.
What should I check before installing wheels from another year?
Confirm the recorded core mounting specs, then verify wheel width, offset/backspacing, brake and suspension clearance, lug-seat geometry, load rating, tire diameter, and TPMS compatibility. This page reports recorded specifications and does not certify installation.