2010 Toyota Highlander Hybrid Wheel Interchange
OEM wheel/tire sizes and fitment specs for the 2010 Toyota Highlander Hybrid.
2010 Toyota Highlander Hybrid Wheel Fitment
| Bolt Pattern | 5x114.3 |
|---|---|
| Center Bore | 60.1 mm |
| Thread Size | M12 x 1.5 |
| Rim Diameter | Not specified – check via calculator |
| Rim Width | Not specified – check via calculator |
| Wheel Offset | Not specified – check via calculator |
Use the calculator below to compare wheels from another vehicle against your 2010 Toyota Highlander Hybrid, or check compatible donor vehicles that share the same bolt pattern and center bore.
Fitment Basics
- Always confirm center bore matches your hub, or use hub-centric rings to take up the gap.
- Check offset carefully – wheels that stick out too far can rub on fenders or suspension components.
- Verify thread size and lug type before buying replacement bolts or lug nuts.
- When in doubt, use the calculator below to compare exact specs side by side.
Find Wheels That Fit This 2010 Toyota Highlander Hybrid
Compare
Compare wheel compatibility between two vehicles
Wheels from (donor vehicle)
Installed on (your vehicle)
Selected Car:
2010 Toyota Highlander Hybrid
