2008 Audi Q7 Wheel Interchange

OEM wheel and tire fitment specs for the 2008 Audi Q7, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.

2008 Audi Q7 Fitment Specs

Baseline mounting dimensions used for interchange decisions.

Bolt Pattern5x130
Center Bore71.6 mm
Lug ThreadM14 x 1.5
OEM Wheel Sizes18" – 21"
OEM Widths7.5" – 10"
OEM Offset Range20 mm – 62 mm

Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.

Wheels That Interchange With a 2008 Audi Q7

Results are evaluated from bolt pattern, center bore direction, OEM width/offset envelope, and lug hardware – not bolt pattern alone.

Direct Fit

2007 Audi Q7

Direct Fit
  • Bolt pattern5x130 · Match
  • Center bore71.6 mm · Match
  • Wheel geometryCompatible with OEM envelope

Geometry within known OEM envelope (approx. outer change -6.18 mm, inner change -0.17 mm vs mid OEM).

2009 Audi Q7

Direct Fit
  • Bolt pattern5x130 · Match
  • Center bore71.6 mm · Match
  • Wheel geometryCompatible with OEM envelope

Geometry within known OEM envelope (approx. outer change -6.18 mm, inner change -0.17 mm vs mid OEM).

2010 Audi Q7

Direct Fit
  • Bolt pattern5x130 · Match
  • Center bore71.6 mm · Match
  • Wheel geometryCompatible with OEM envelope

Geometry within known OEM envelope (approx. outer change -6.18 mm, inner change -0.17 mm vs mid OEM).

2011 Audi Q7

Direct Fit
  • Bolt pattern5x130 · Match
  • Center bore71.6 mm · Match
  • Wheel geometryCompatible with OEM envelope

Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).

2012 Audi Q7

Direct Fit
  • Bolt pattern5x130 · Match
  • Center bore71.6 mm · Match
  • Wheel geometryCompatible with OEM envelope

Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).

2013 Audi Q7

Direct Fit
  • Bolt pattern5x130 · Match
  • Center bore71.6 mm · Match
  • Wheel geometryCompatible with OEM envelope

Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).

2014 Audi Q7

Direct Fit
  • Bolt pattern5x130 · Match
  • Center bore71.6 mm · Match
  • Wheel geometryCompatible with OEM envelope

Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).

2015 Audi Q7

Direct Fit
  • Bolt pattern5x130 · Match
  • Center bore71.6 mm · Match
  • Wheel geometryCompatible with OEM envelope

Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).

Audi Q7 Years With Compatible Wheels

Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.

Will Wheels From Another Vehicle Fit?

Compare a donor vehicle or custom wheel against this 2008 Audi Q7.

Compare

Compare wheel compatibility between two vehicles

Wheels from (donor vehicle)

Installed on (your vehicle)

Selected Car:

2008 Audi Q7

Compare Rims

Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x130
Center Bore
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
71.6 mm
Thread Size
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M14 x 1.5
Rim Diameter
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
19"
Rim Width
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
8.5"
Wheel Offset
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
62 mm
Backspacing
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-

Wheel Fitment Parts for the 2008 Audi Q7

Products below are matched to required fitment dimensions from our parts inventory. Confirm seat style, thickness, and clearance before ordering.

Lug Nuts / Wheel Bolts

M14 x 1.5

As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.

Why These Wheels Fit

Wheel interchange depends on more than bolt pattern. Where data is available, this site compares:

  • Bolt pattern / PCD
  • Center bore direction (donor wheel bore must not be smaller than the hub)
  • Wheel diameter, width, and offset against known OEM ranges
  • Lug thread / hardware differences (vehicle-side hardware)

A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.

Understanding Wheel Fitment for Your 2008 Audi Q7

There's a common misconception that all wheels will fit any vehicle as long as they look similar. You might think that if a wheel looks good, it should work. But that’s not the case, especially for your Audi Q7.

Why It Seems True

With so many wheel designs and styles available, it can be easy to assume that as long as the size is somewhat right, it should fit. After all, the wheels are just round pieces of metal that hold tires, right? That’s a fair thought, but there’s much more to it when it comes to fitment.

What Is True

For your 2008 Audi Q7, there are specific fitment details you need to consider:

  • Bolt pattern (studs x PCD): 5x130
  • Center bore: 71.5 mm
  • Thread size: M14 x 1.5
  • Rim diameter: 19 in
  • Rim width: 8.5 in
  • Wheel offset (ET): 62 mm
  • Backspacing: 6.69 in
  • Tire section width: 265 mm
  • Tire aspect ratio: 50%
  • Tire rim diameter: 19 in

These specifications ensure that the wheels fit securely and function properly with your vehicle’s suspension and brakes.

Implications

Using wheels that don’t match these specifications can lead to safety issues, such as poor handling or even tire blowouts. It’s crucial to verify that any wheels you consider are compatible not just visually, but mechanically.

Quick Tests

To ensure that the wheels you’re looking at will fit your Audi Q7, you can use the wheel fitment calculator available on wheelinterchange.com. Just compare the wheels from the donor vehicle with what’s currently installed on your Q7.

Additionally, if you're considering custom wheel sizes, you can adjust the rim diameter, width, and offset in the calculator. This allows you to see how changes affect fitment and performance.

If you need tools or parts for your wheel fitment project, check out these resources:

In summary, understanding the specific fitment requirements for your 2008 Audi Q7 is essential. It might seem complicated, but with the right information, you can confidently choose the right wheels for your vehicle.

Nick Marchenko

Automotive Expert