Wheel Interchange Blog

An OEM wheel label can provide useful identification and dimensional data, but not every number on the sticker has the same fitment value. The safest approach is to treat the label...

Wheel adapters are not universal spacers. They create a specific conversion between the vehicle hub and the wheel, so the correct purchase must match both bolt patterns, both hub i...

Can hub-centric rings fix wheel vibration? Yes–hub-centric rings can often correct vibration caused by a wheel that has a larger center bore than the vehicle’s hub pilot. They fill...

A narrower donor wheel can improve suspension and fender clearance, but wheel width alone does not determine fitment. Offset, tire dimensions, brake geometry and suspension movemen...

The decision: what offset will the wheel have after the spacer? For a conventional spacer installed between the wheel and hub, calculate effective offset with: \[ \text{Effective o...

Same PCD does not guarantee wheel fitment A donor wheel can have the same bolt pattern as the target vehicle and still be unusable. The PCD confirms only that the wheel’s bolt hole...

Pickup-truck wheel interchange is less forgiving than passenger-car interchange because the wheel is part of a load-carrying system. A donor wheel can match the bolt pattern and st...

Start with the reference wheel The safest way to predict strut clearance is to compare the donor wheel with a wheel that is already proven to fit the vehicle. You need the referenc...

To mount an 8x170 wheel on an 8x165.1 vehicle, you need a directional wheel adapter with the vehicle-side pattern of 8x165.1 and the wheel-side pattern of 8x170. These two PCD spec...

A hub ring marked 73.1 → 67.1 mm is the correct sizing direction for a wheel with a 73.1 mm center bore being installed on a vehicle hub measuring 67.1 mm. The larger number is the...