2019 Honda Passport Wheel Interchange

2019 Honda Passport Wheel Fitment Guide

Known OEM Fitment For 2019 Honda Passport

The following wheel and tire information is the known reference data provided for the 2019 Honda Passport. Fitment can vary by trim, package, market, brake equipment, and replacement-wheel design. Confirm the specifications for your specific vehicle with the owner’s manual, the driver-door certification label, and an authorized Honda source before ordering.

A wheel must match the 5x120 bolt pattern, clear the 64.1 mm hub correctly, and provide adequate brake, suspension, and fender clearance. Matching the bolt pattern alone does not prove that a wheel is safe or suitable.

How To Use The Wheel Interchange Calculator

Use the calculator to compare a donor vehicle’s wheels with the wheels installed on your 2019 Honda Passport. Enter the donor vehicle under “Wheels from” and the Passport under “Installed on.” Review the bolt pattern, center bore, wheel diameter, width, offset, and tire dimensions together rather than relying on one matching number.

You can also select “Custom wheel size” to test a specific rim diameter, width, and offset. Select “Custom tire size” to compare section width and aspect ratio. When you change the rim diameter, the calculator updates the tire diameter comparison, which helps identify changes in overall rolling diameter.

Use the calculator as a screening tool, not as a substitute for a physical test fit or OEM confirmation. A calculator may not account for spoke clearance, brake-caliper shape, suspension movement, tire brand differences, load rating, or the condition of the vehicle.

Fitment Checklist Before You Buy

Confirm the wheel’s 5x120 bolt pattern, 64.1 mm hub fit, M14 x 1.5 fastener compatibility, diameter, width, and offset. Ask the wheel seller for a complete specification sheet instead of relying only on a vehicle application claim.

Check the wheel’s load rating against the vehicle manufacturer’s requirements. Verify that the tire has the required load index, speed rating, service description, and approved inflation pressure. The driver-door label and owner’s manual are the primary sources for vehicle-specific tire pressure and load information.

Compare the replacement wheel’s spoke and barrel shape with the original wheel for brake clearance. Check inner clearance to the strut, steering and suspension components, and outer clearance to the fender and liner. Tire width and sidewall shape can vary between brands even when the nominal size is identical.

Confirm whether the wheel requires a different lug nut seat, valve stem, tire-pressure monitoring sensor, or center cap. Do not assume the original lug nuts are correct for an aftermarket wheel.

Plus Sizing And Common Upgrades

Plus sizing changes the relationship between wheel diameter and tire sidewall height. A larger wheel generally requires a lower-profile tire to keep the overall tire diameter close to the vehicle reference size, but the correct replacement still depends on load capacity, clearance, speed rating, and manufacturer approval.

The known reference here is a 20 x 8.0 wheel with ET55 and a 245/50R20 tire. If you test a different diameter, width, offset, or tire size in the calculator, compare the resulting overall diameter, sidewall change, inner clearance, and outer position. A change in offset can move the wheel toward suspension parts or toward the fender.

Do not select a tire solely because its calculated diameter is close. Confirm that its load index and speed rating meet or exceed the vehicle requirements, and verify that the wheel width falls within the tire manufacturer’s approved range.

Installation Tips

Inspect every wheel for cracks, bends, corrosion, damaged mounting seats, and obstructions before installation. Clean rust and debris from the hub face and wheel mounting surface. The 64.1 mm center bore specification must be treated as a fitment requirement, not an optional measurement.

Install the correct lug nuts for the wheel’s seat design and thread specification. Start all fasteners by hand, lower the vehicle so the wheel cannot rotate, and tighten the lug nuts in a star pattern. Apply the vehicle manufacturer’s specified torque using a calibrated torque wrench. Do not lubricate wheel-stud threads unless the vehicle or fastener manufacturer specifically requires it.

After installation, check for contact with the brake caliper, strut, suspension, steering components, and fender liner. Rotate the steering from lock to lock and inspect clearance. Recheck lug-nut torque after the initial driving period specified by the wheel or vehicle manufacturer, and monitor tire pressure using the door-label recommendation.

Tools And Helpful Supplies

Useful equipment includes a calibrated torque wrench, correctly sized socket, jack and jack stands or an appropriate vehicle lift, wheel chocks, a tire-pressure gauge, and a tread-depth gauge. Use lifting points and support procedures specified by Honda. Never work under a vehicle supported only by a jack.

A torque wrench can help achieve the specified wheel-fastener torque during installation. Shop automotive torque wrenches on Amazon.

A tire-pressure gauge is useful for checking cold inflation pressure against the vehicle door label. Shop digital tire-pressure gauges on Amazon.

FAQs

What is the bolt pattern for the 2019 Honda Passport?

The known reference specification is 5x120. Confirm the vehicle-specific specification and the wheel manufacturer’s listing before purchase.

What is the center bore?

The known center bore is 64.1 mm. A wheel with a smaller bore will not fit over the hub. A larger bore may require a properly sized hub-centric solution approved for the application, but the complete wheel fitment must still be verified.

What wheel size is listed in the provided reference data?

The provided reference is a 20 x 8.0 wheel with ET55 offset and 6.17 inches of backspacing. This information may not represent every trim or market configuration, so confirm your Passport’s original equipment data using Honda documentation or the vehicle identification number.

What tire size is listed for this fitment?

The provided tire reference is 245/50R20, consisting of a 245 mm section width, a 50 percent aspect ratio, and a 20-inch rim diameter. Verify the required tire size, load index, speed rating, and inflation pressure on the vehicle’s door label and in the owner’s manual.

Can any 5x120 wheel fit this Passport?

No. The bolt pattern is only one part of fitment. The center bore, offset, width, brake clearance, lug-seat design, load rating, and tire specifications must also be correct.

How can I compare a different donor vehicle?

Enter the donor vehicle under “Wheels from” and the 2019 Honda Passport under “Installed on.” Use the custom wheel and tire fields when the exact donor or replacement specifications are known. Then verify the result with the wheel manufacturer and perform a physical clearance check before driving.

Does changing wheel diameter change tire diameter?

In the calculator, changing the custom rim diameter updates the tire diameter comparison. A replacement tire should be evaluated for overall diameter, load capacity, clearance, and vehicle-system compatibility, not diameter alone.

Where can I confirm the final specifications?

Check the driver-door certification label, owner’s manual, original wheel markings, Honda service information, and the replacement wheel and tire manufacturer’s specifications. If any source conflicts, pause the installation and obtain confirmation from a qualified tire and wheel professional.