2007 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2022 Audi RS e-tron GT Wheel Interchange
OEM wheel and tire fitment specs for the 2022 Audi RS e-tron GT, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.
2022 Audi RS e-tron GT Fitment Specs
Baseline mounting dimensions used for interchange decisions.
Bolt Pattern5x130
Center Bore71.6 mm
Lug ThreadM14 x 1.5
OEM Wheel Sizes20" – 21"
OEM Widths9" – 9.5"
OEM Offset Range54 mm – 60 mm
Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.
Wheels That Interchange With a 2022 Audi RS e-tron GT
Results are evaluated from bolt pattern, center bore direction, OEM width/offset envelope, and lug hardware – not bolt pattern alone.
Direct Fit
2008 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2009 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2010 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2011 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2012 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2013 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2014 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2015 Audi Q7
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -2.18 mm, inner change -4.18 mm vs mid OEM).
2022 Audi e-tron GT
Direct Fit- Bolt pattern5x130 · Match
- Center bore71.6 mm · Match
- Wheel geometryCompatible with OEM envelope
Geometry within known OEM envelope (approx. outer change -0.17 mm, inner change -6.18 mm vs mid OEM).
Check Fitment
2023 Audi RS e-tron GT
Check Fitment- Bolt patternNot fully verified
- Center boreNot fully verified
- Wheel geometryNot fully verified
Bolt pattern data is incomplete for a full interchange decision.
Audi RS e-tron GT Years With Compatible Wheels
Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.
Will Wheels From Another Vehicle Fit?
Compare a donor vehicle or custom wheel against this 2022 Audi RS e-tron GT.
Compare
Compare wheel compatibility between two vehicles
Wheels from (donor vehicle)
Installed on (your vehicle)
Selected Car:
2022 Audi RS e-tron GT
Compare Rims
Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x130
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
71.6 mm
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M14 x 1.5
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
20"
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
9.0"
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
54 mm
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-
Wheel Fitment Parts for the 2022 Audi RS e-tron GT
Products below are matched to required fitment dimensions from our parts inventory. Confirm seat style, thickness, and clearance before ordering.
Lug Nuts / Wheel Bolts
M14 x 1.5
Dorman 611-236 Wheel Lug Nut M14-1.50
M14 x 1.5 · Confirm wheel seat style before ordering
View on Amazon →
White Knight M14 x 1.50 Lug Nuts
M14 x 1.5 · Confirm wheel seat style before ordering
View on Amazon →
White Knight 3809XLBK-33AM Black M14x1.50 Lug Nuts
M14 x 1.5 · Confirm wheel seat style before ordering
View on Amazon →As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.
Why These Wheels Fit
Wheel interchange depends on more than bolt pattern. Where data is available, this site compares:
- Bolt pattern / PCD
- Center bore direction (donor wheel bore must not be smaller than the hub)
- Wheel diameter, width, and offset against known OEM ranges
- Lug thread / hardware differences (vehicle-side hardware)
A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.
2022 Audi RS e-tron GT Wheel Fitment
| Bolt Pattern | 5x130 |
|---|---|
| Center Bore | 71.6 mm |
| Thread Size | M14 x 1.5 |
| Rim Diameter | 20" |
| Rim Width | 9.0" |
| Wheel Offset | 54 mm |
Use the calculator below to compare wheels from another vehicle against your 2022 Audi RS e-tron GT, or check compatible donor vehicles that share the same bolt pattern and center bore.
Fitment Basics
- Always confirm center bore matches your hub, or use hub-centric rings to take up the gap.
- Check offset carefully – wheels that stick out too far can rub on fenders or suspension components.
- Verify thread size and lug type before buying replacement bolts or lug nuts.
- When in doubt, use the calculator below to compare exact specs side by side.
