2019 Audi Q5 Wheel Interchange

OEM wheel and tire fitment specs for the 2019 Audi Q5, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.

Recorded OEM specifications for the 2019 Audi Q5, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.

Start a donor comparison

Save these wheel specs to your Ownery garage

2019 Audi Q5 Fitment Specs

Baseline mounting dimensions used for interchange decisions.

Bolt Pattern5x112
Center Bore66.5 mm
Lug ThreadM14 x 1.5 View M14 x 1.5 options on Amazon
OEM Wheel Sizes17" – 21"
OEM Widths7" – 8.5"
OEM Offset Range34 mm – 39 mm

Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.

Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.

Explore wheels at Tire Rack

Selected size: 17 × 8″ · ET +39

Showing matching bolt patterns and offsets up to 20 mm lower. Confirm center bore, load rating, and clearance at Tire Rack.

We may earn a commission when you buy through these links. Prices and availability may change.

Donor vehicles with overlapping OEM specs

These are vehicle-year records whose recorded OEM ranges overlap this 2019 Audi Q5. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.

Evaluated 95 donor years. Listed 24 eligible overlaps (not all evaluated years are compatible). Showing all listed.

2009–2015, 2018, 2020–2022 Audi Q5

OEM specs overlapOEM ranges overlap – confirm the specific wheel

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2018
  • 2020
  • 2021
  • 2022
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Approximate position vs the mid OEM package: outer change 4.68 mm, inner change 1.67 mm. This uses aggregated width/offset ranges, not a specific wheel.

2016–2017 Audi Q5

Check wheel configurationCenter-bore records disagree

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2016
  • 2017
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Center-bore records disagree (donor year-level hub 66.6 mm vs trim range 66.5–66.5 mm). Unqualified overlap is not claimed until the conflict is resolved. Approximate position vs the mid OEM package: outer change 4.68 mm, inner change 1.67 mm. This uses aggregated width/offset ranges, not a specific wheel.

2023 Audi Q5

Insufficient dataInsufficient or mixed data
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryNot fully recorded

Wheel width/offset data is incomplete.

2007–2008, 2021–2022 Audi A4

OEM specs overlapOEM ranges overlap – confirm the specific wheel

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2007
  • 2008
  • 2021
  • 2022
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Approximate position vs the mid OEM package: outer change -5.68 mm, inner change -0.67 mm. This uses aggregated width/offset ranges, not a specific wheel.

2018–2022 Audi A5

OEM specs overlapOEM ranges overlap – confirm the specific wheel

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2018
  • 2019
  • 2020
  • 2021
  • 2022
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Approximate position vs the mid OEM package: outer change -0.67 mm, inner change -5.68 mm. This uses aggregated width/offset ranges, not a specific wheel.

2021 Audi A6

OEM specs overlapOEM ranges overlap – confirm the specific wheel
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Approximate position vs the mid OEM package: outer change -2.68 mm, inner change -3.68 mm. This uses aggregated width/offset ranges, not a specific wheel.

Audi Q5 Years With Compatible Wheels

Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.

Will Wheels From Another Vehicle Fit?

Compare a donor vehicle or custom wheel against this 2019 Audi Q5. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.

Compare

Compare wheel compatibility between two vehicles

Wheels from (donor vehicle)

Installed on (your vehicle)

Selected Car:

2019 Audi Q5

Compare Rims

Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x112
Center Bore
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
66.5 mm
Thread Size
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M14 x 1.5
Rim Diameter
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
17"
Rim Width
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
8.0"
Wheel Offset
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
39 mm
Backspacing
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-

Wheel Fitment Parts for the 2019 Audi Q5

Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.

Lug Nuts / Wheel Bolts

M14 x 1.5

As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.

Understanding Wheel Fitment for Your 2019 Audi Q5

When it comes to fitting new wheels on your 2019 Audi Q5, there can be a lot of confusion. A common misconception is that all wheels with the same bolt pattern will fit any vehicle. Let's break this down step by step.

Misconception: Any 5x112 Wheel Fits the Audi Q5

It might seem true that if a wheel has the same bolt pattern of 5x112, it should fit your Audi Q5 without any issues. Many think this is the only specification that matters.

Why It Seems True

The 5x112 bolt pattern is indeed a popular choice for many Volkswagen group vehicles, including Audi. This leads to the assumption that as long as the bolt pattern matches, the wheel will fit. However, that’s just one piece of a bigger puzzle.

What Is True

While the bolt pattern is important, several other specifications need to align for a proper fit. For the 2019 Audi Q5, here are the key specifications:

  • Center Bore: 66.5 mm
  • Thread Size: M14 x 1.5
  • Rim Diameter: 19 inches
  • Rim Width: 8.0 inches
  • Wheel Offset (ET): 35 mm
  • Backspacing: 5.38 inches
  • Tire Section Width: 235 mm
  • Tire Aspect Ratio: 65%
  • Tire Rim Diameter: 17 inches

All these factors must be considered to ensure not just fitment, but also safety and performance.

Implications

Using wheels that don’t match these specifications can lead to poor handling, tire wear, or even damage to your vehicle. It’s crucial to ensure that any wheel you consider meets all the necessary requirements.

Quick Tests

To make sure you’re selecting the right wheels for your 2019 Audi Q5, here are some quick tests you can perform:

  • Use a wheel fitment calculator to compare potential wheels. You can find one on wheelinterchange.com.
  • Check the specifications against those listed above. If you're unsure, refer to the OEM sources or consult with a local dealer.
  • Consider measurements for backspacing and offset to avoid any clearance issues.

Need Tools or Parts?

If you’re looking to get started with your wheel upgrade, here are some useful links:

In conclusion, while it’s easy to think that matching the bolt pattern is sufficient, remember to consider all specifications for a safe and effective wheel fitment on your Audi Q5. With a little research and the right tools, you’ll be able to make informed decisions that enhance your vehicle.

Methodology and sources

Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:

  • Bolt pattern / PCD
  • Center bore direction (donor wheel bore must not be smaller than the hub)
  • Wheel diameter, width, and offset against known OEM ranges
  • Lug thread / hardware differences (vehicle-side hardware)

A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.

Nick Marchenko

Automotive Expert