OEM wheel and tire fitment specs for the 2014 Audi RS 7, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.
Recorded OEM specifications for the 2014 Audi RS 7, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.
Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.
Center-bore records disagree: year-level hub 66.6 mm vs trim range 66.5–66.5 mm. Interchange below does not treat this as an unqualified match.
Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.
Donor vehicles with overlapping OEM specs
These are vehicle-year records whose recorded OEM ranges overlap this 2014 Audi RS 7. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.
Evaluated 188 donor years. Listed 24 eligible overlaps (not all evaluated years are compatible). Showing all listed.
Wheel geometryOEM width/offset ranges overlap (not a specific wheel)
Center-bore records disagree (target year-level hub 66.6 mm vs trim range 66.5–66.5 mm; donor year-level hub 66.6 mm vs trim range 66.5–66.5 mm). Unqualified overlap is not claimed until the conflict is resolved. Approximate position vs the mid OEM package: outer change -1.35 mm, inner change -11.35 mm. This uses aggregated width/offset ranges, not a specific wheel.
Donor width/offset sits outside the known OEM envelope for this vehicle. Precomputed data suggested a spacer; geometry was re-checked against OEM envelope.
Wheel geometryOEM width/offset ranges overlap (not a specific wheel)
Dataset suggestionHub-centric rings ≈ 66.6 → 66.5 mm – not a verified installation requirement.
Hub-centric rings of about 66.6 → 66.5 mm mm may be relevant if the wheel bore is larger than the hub; they cannot enlarge a smaller bore. Approximate position vs the mid OEM package: outer change -4 mm, inner change 4 mm. This uses aggregated width/offset ranges, not a specific wheel.
Dataset suggestionWheel spacer ≈ 15.35 mm – not a verified installation requirement.
A spacer of about 15.35 mm is a dataset suggestion only; clearance is not verified. Estimated outer position is about 15.35 mm farther inward than the mid OEM package.
Dataset suggestionWheel spacer ≈ 6 mm – not a verified installation requirement.
A spacer of about 6 mm is a dataset suggestion only; clearance is not verified. Estimated outer position is about 6 mm farther inward than the mid OEM package.
Dataset suggestionWheel spacer ≈ 13.35 mm – not a verified installation requirement.
A spacer of about 13.35 mm is a dataset suggestion only; clearance is not verified. Estimated outer position is about 13.35 mm farther inward than the mid OEM package.
Audi RS 7 Years With Compatible Wheels
Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.
Compare a donor vehicle or custom wheel against this 2014 Audi RS 7. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.
Compare
Compare wheel compatibility between two vehicles
Wheels from (donor vehicle)
Selected Car:
Custom wheel size (optional)
Tip: change values here to simulate custom wheels and immediately see the impact in the comparison below.
Custom tire size (optional)
Installed on (your vehicle)
Selected Car:
2014 Audi RS 7
Compare Rims
Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x112
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
66.5 mm
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M14 x 1.5
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
20"
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
9.0"
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
35 mm
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-
Compare Tires
Specification
Wheels from
Installed on
Result (Click it)
Section Width
The width of the tire from sidewall to sidewall, measured in millimeters.
-
-
Aspect Ratio
The height of the tire’s sidewall expressed as a percentage of its width.
-
-
Diameter
The wheel diameter for which the tire is designed to fit.
-
-
Tire Pressure
The recommended air pressure for safe and efficient driving.
-
-
Overall Diameter
The total height of the tire and wheel combined affects clearance and speedometer accuracy.
-
-
Wheel Fitment Parts for the 2014 Audi RS 7
Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.
As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.
Understanding Wheel Fitment for Your 2014 Audi RS 7
Let’s clear up some common misconceptions about wheel fitment for your 2014 Audi RS 7. Many DIY owners and technicians feel overwhelmed by this topic, but it doesn’t have to be complicated.
Misconception: Any wheel will fit my Audi RS 7
This is a common belief among car enthusiasts. You might think that as long as the wheels look good, they’ll work fine on your vehicle.
Why it seems true
With so many aftermarket options available, it’s easy to assume that any wheel can be swapped in. Plus, the aesthetic appeal can sometimes overshadow the technical details.
What is true
The reality is that wheels need to conform to specific measurements to fit properly. For the 2014 Audi RS 7, you’ll need to consider factors like bolt pattern, center bore, and offset. Here are the key specs:
Bolt pattern: 5x112
Center bore: 66.6 mm
Thread size: M14 x 1.5
Rim diameter: 20 in
Rim width: 9.0 in
Wheel offset: 35 mm
Backspacing: 5.88 in
Tire section width: 275 mm
Tire aspect ratio: 35%
Tire rim diameter: 20 in
Implications
Using wheels that don’t meet these specifications can lead to issues such as improper fitment, which might affect handling and safety. It's crucial to ensure your wheels are compatible to maintain your Audi's performance and safety standards.
Quick tests
Before purchasing new wheels, here are a couple of quick tests to confirm compatibility:
Check the bolt pattern against the OEM specs (5x112).
Measure the center bore to ensure it fits over the hub (66.6 mm).
A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.
