Recorded OEM specifications for the 2014 Hyundai Accent, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.
Baseline mounting dimensions used for interchange decisions.
Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.
Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.
These are vehicle-year records whose recorded OEM ranges overlap this 2014 Hyundai Accent. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.
Evaluated 23 donor years. Listed 15 eligible overlaps (not all evaluated years are compatible). Showing all listed.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Approximate position vs the mid OEM package: outer change -3.68 mm, inner change -2.68 mm. This uses aggregated width/offset ranges, not a specific wheel.
Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.
Compare a donor vehicle or custom wheel against this 2014 Hyundai Accent. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.
Compare wheel compatibility between two vehicles
2014 Hyundai Accent
Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.
M12 x 1.5
M12 x 1.5 · Thread match only; seat style is not verified
View on Amazon →
M12 x 1.5 · Thread match only; seat style is not verified
View on Amazon →
M12 x 1.5 · Thread match only; seat style is not verified
View on Amazon →As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.
The following specifications are the known fitment values available for the 2014 Hyundai Accent. Equipment can vary by trim, market, and installed wheel package, so confirm the vehicle-specific information in the owner’s manual, service information, or the markings on the original wheel before ordering.
| Specification | Known value |
|---|---|
| Bolt pattern | 4x100, meaning 4 studs on a 100 mm pitch circle diameter |
| Center bore | 54.1 mm |
| Thread size | M12 x 1.5 |
| Rim diameter | 16 inches |
| Rim width | 6.0 inches |
| Wheel offset | ET52 |
| Backspacing | 5.05 inches |
| Tire section width | 175 mm |
| Tire aspect ratio | 70 percent |
| Tire rim diameter | 14 inches |
The supplied wheel diameter and tire rim diameter do not describe one complete wheel-and-tire assembly because the wheel value is 16 inches while the tire rim diameter is 14 inches. Do not mount a tire on a wheel unless the tire bead diameter exactly matches the wheel diameter. Confirm which specification applies to your trim and current vehicle before purchase. The tire information can also be checked on the sidewall, while the wheel diameter and width are commonly stamped or cast on the wheel.
Use the calculator to compare a donor vehicle’s wheel and tire measurements with the measurements installed on your 2014 Hyundai Accent. Select the donor vehicle under “Wheels from” and select the 2014 Hyundai Accent under “Installed on.” Review the displayed differences in bolt pattern, center bore, wheel diameter, width, offset, and tire dimensions.
You can also enter a proposed wheel under “Custom wheel size” by changing rim diameter, rim width, and offset. Enter a proposed tire under “Custom tire size” by changing section width and aspect ratio. When rim diameter changes, the calculator updates the tire diameter comparison. Use that result as a screening tool, not as proof of safe clearance.
A calculator cannot confirm brake-caliper clearance, suspension clearance at full steering lock, fender clearance through suspension travel, load rating, tire-pressure-monitor compatibility, or whether a wheel’s lug-seat design is correct. Physically inspect and test-fit parts, and confirm the final combination against Hyundai service information and the wheel manufacturer’s specifications.
Start with the vehicle identification number, trim level, market, and current wheel markings. Confirm the 4x100 bolt pattern, 54.1 mm center bore requirement, M12 x 1.5 thread specification, and the wheel’s load rating. A wheel with a different bolt pattern should not be forced onto the vehicle.
Check that the replacement wheel’s center bore is equal to or larger than the vehicle’s hub diameter. A larger bore may require correctly sized hub-centric rings, but rings do not correct an incorrect bolt pattern or offset. A wheel with a smaller center bore will not seat over the hub.
Compare offset and backspacing rather than relying on appearance alone. Confirm that the wheel clears the brake components and that the tire does not contact the strut, spring, inner wheel well, fender, or suspension components during steering and suspension movement. Verify tire load and speed ratings using the vehicle placard and tire manufacturer data.
Do not rely on the listed 14-inch tire rim diameter with the listed 16-inch wheel diameter without resolving the discrepancy. The tire and wheel must have matching bead-seat diameters.
Plus sizing changes the wheel diameter while reducing tire sidewall height to preserve a similar overall tire diameter. The calculator can show how a custom rim diameter, wheel width, offset, section width, and aspect ratio compare with the selected vehicle setup. It does not establish that a particular upgrade is approved or physically safe.
When considering a larger wheel, maintain adequate load capacity and confirm the complete tire size is approved for the vehicle. A wider tire can change steering effort, road noise, fuel consumption, wet-weather behavior, and clearance. A lower-profile tire generally provides less sidewall protection from pothole impacts.
Do not select a wheel solely because it has the 4x100 pattern. Center bore, offset, width, brake clearance, lug-seat shape, wheel load rating, and tire dimensions must all be correct. Confirm the final dimensions with the wheel manufacturer and an OEM source for the exact vehicle configuration.
Inspect the hub face and wheel mounting surface. Remove rust, dirt, paint buildup, and debris that could prevent the wheel from sitting flush. Never place spacers, washers, or unrelated hardware between the wheel and hub unless the component is specifically engineered and approved for that application.
Use the correct M12 x 1.5 hardware and confirm whether the wheel requires a particular lug-seat design. Thread engagement, lug-seat shape, and stud or bolt length must match the wheel. Do not assume the original hardware is compatible with an aftermarket wheel.
Install the wheel by hand, tighten the hardware in a star pattern, and use a calibrated torque wrench. The correct torque value is not provided here and must come from the Hyundai owner’s or service manual, or the wheel manufacturer when applicable. Recheck torque after the manufacturer-specified break-in distance and whenever the wheel has been removed.
After installation, check tire pressure using the vehicle placard, confirm that no warning lights or tire-pressure-monitor issues are present, and perform a slow clearance check with the steering turned in both directions. Stop immediately if rubbing, vibration, looseness, or unusual noise occurs.
A torque wrench, properly sized socket, jack, jack stands, wheel chocks, tire-pressure gauge, and a wire brush are useful for a safe wheel change. Use jack stands on a firm, level surface and never work under a vehicle supported only by a jack.
For a suitable torque-wrench search, see automotive torque wrenches on Amazon. For checking tire pressure, see digital tire-pressure gauges on Amazon. These links are provided for general tool research. Confirm the tool’s range, accuracy, and intended use before purchase.
What is the bolt pattern for the 2014 Hyundai Accent?
The known bolt pattern is 4x100. Confirm the vehicle’s exact trim and market before ordering wheels.
What is the center bore?
The known center bore is 54.1 mm. A replacement wheel with a larger bore may need properly sized hub-centric rings, while a wheel with a smaller bore will not fit over the hub.
What lug thread size is listed?
The known thread size is M12 x 1.5. The lug-seat shape and hardware length must also match the replacement wheel, so do not rely on thread size alone.
Can I use the listed 175/70R14 tire on a 16-inch wheel?
No. A tire marked for a 14-inch rim cannot be mounted on a 16-inch wheel. The supplied data includes both a 16-inch rim diameter and a 14-inch tire rim diameter, so verify the correct trim, tire sidewall, and wheel markings before buying or mounting anything.
Does a 4x100 wheel automatically fit?
No. Bolt pattern is only one part of fitment. You must also check center bore, offset, width, brake clearance, lug-seat design, wheel load rating, tire size, and clearance through steering and suspension travel.
Can the wheel interchange calculator confirm safe fitment?
The calculator can compare donor and installed measurements and evaluate custom wheel and tire dimensions. It cannot confirm every physical clearance, load requirement, hardware detail, or trim-specific approval. Use it together with an inspection and OEM or manufacturer documentation.
What offset and backspacing are listed for this vehicle?
The known wheel offset is ET52 and the listed backspacing is 5.05 inches. Confirm these values against the exact wheel and vehicle configuration because small changes can affect inner and outer clearance.
Where should I confirm the final specifications?
Check the vehicle identification number and trim with Hyundai service information, the owner’s manual, the tire-and-loading information label, the original wheel markings, and the replacement wheel manufacturer’s fitment and load-rating data. Resolve any conflict before installation.
Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:
A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.
