2006 Ford Fusion Wheel Interchange

OEM wheel and tire fitment specs for the 2006 Ford Fusion, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.

Recorded OEM specifications for the 2006 Ford Fusion, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.

Start a donor comparison

Save these wheel specs to your Ownery garage

2006 Ford Fusion Fitment Specs

Baseline mounting dimensions used for interchange decisions.

Bolt Pattern4x108, 5x114.3
Center Bore63.4 mm
Lug ThreadM12 x 1.5 View M12 x 1.5 options on Amazon
OEM Wheel Sizes14" – 18"
OEM Widths5" – 8"
OEM Offset Range38 mm – 63 mm

Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.

Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.

Explore wheels at Tire Rack

Selected size: 16 × 6.5″ · ET +40

Showing matching bolt patterns and offsets up to 20 mm lower. Confirm center bore, load rating, and clearance at Tire Rack.

We may earn a commission when you buy through these links. Prices and availability may change.

Donor vehicles with overlapping OEM specs

These are vehicle-year records whose recorded OEM ranges overlap this 2006 Ford Fusion. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.

Evaluated 53 donor years. Listed 24 eligible overlaps (not all evaluated years are compatible). Showing all listed.

2007–2012 Ford Fusion

Check wheel configurationWheel bore may need hub-centric rings; clearance unverified

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2007
  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • Bolt pattern4x108 · Same recorded PCD
  • Center bore67.1 mm donor vs hub 63.4 mm
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Dataset suggestionHub-centric rings ≈ 67.1 → 63.4 mm – not a verified installation requirement.

Hub-centric rings of about 67.1 → 63.4 mm mm may be relevant if the wheel bore is larger than the hub; they cannot enlarge a smaller bore.

2005–2007 Ford Five Hundred

Check lug hardwareCheck lug hardware: donor year 1/2"-20UNF vs 2006 Ford Fusion M12x1.5

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2005
  • 2006
  • 2007
  • Bolt pattern5x114.3 · 5x114.3
  • Center bore63.4 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Recorded vehicle-side thread for the 2006 Ford Fusion is M12x1.5. This donor year is recorded as 1/2"-20UNF. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.

View M12 x 1.5 options on Amazon – thread match only; seat style is not verified.

Recorded vehicle-side thread differs (1/2"-20UNF on the donor year vs M12x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset. Approximate position vs the mid OEM package: outer change 9.85 mm, inner change 2.85 mm. This uses aggregated width/offset ranges, not a specific wheel.

2009–2019 Ford Flex

Check lug hardwareCheck lug hardware: donor year 1/2"-20UNF vs 2006 Ford Fusion M12x1.5

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019
  • Bolt pattern5x114.3 · 5x114.3
  • Center bore63.4 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Recorded vehicle-side thread for the 2006 Ford Fusion is M12x1.5. This donor year is recorded as 1/2"-20UNF. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.

View M12 x 1.5 options on Amazon – thread match only; seat style is not verified.

Recorded vehicle-side thread differs (1/2"-20UNF on the donor year vs M12x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset. Approximate position vs the mid OEM package: outer change 24.2 mm, inner change 1.2 mm. This uses aggregated width/offset ranges, not a specific wheel.

2001–2004 Ford Escape

Check wheel configurationWheel bore may need hub-centric rings; clearance unverified

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2001
  • 2002
  • 2003
  • 2004
  • Bolt pattern5x114.3 · 5x114.3
  • Center bore67.1 mm donor vs hub 63.4 mm
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Dataset suggestionHub-centric rings ≈ 67.1 → 63.4 mm – not a verified installation requirement.

Hub-centric rings of about 67.1 → 63.4 mm mm may be relevant if the wheel bore is larger than the hub; they cannot enlarge a smaller bore.

Ford Fusion Years With Compatible Wheels

Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.

Will Wheels From Another Vehicle Fit?

Compare a donor vehicle or custom wheel against this 2006 Ford Fusion. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.

Compare

Compare wheel compatibility between two vehicles

Wheels from (donor vehicle)

Installed on (your vehicle)

Selected Car:

2006 Ford Fusion

Compare Rims

Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
4x108
Center Bore
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
63.4 mm
Thread Size
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M12 x 1.5
Rim Diameter
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
16"
Rim Width
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
6.5"
Wheel Offset
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
40 mm
Backspacing
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-

Wheel Fitment Parts for the 2006 Ford Fusion

Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.

Lug Nuts / Wheel Bolts

M12 x 1.5

As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.

2006 Ford Fusion Wheel Fitment Guide | wheelinterchange.com

Known OEM Fitment For 2006 Ford Fusion

The values below reflect known factory specifications for at least one 2006 Ford Fusion configuration. Trims and option packages may vary. Always confirm against your door jamb tire placard, owner’s manual, or a VIN-based Ford parts catalog before purchasing wheels or tires.

Bolt pattern5x114.3
Center bore63.4 mm
Thread sizeM12 x 1.5
Rim diameter16 in
Rim width6.5 in
Wheel offset (ET)40 mm
Backspacing4.82 in
Tire size205/60R16

If any of your vehicle’s OEM values differ from the table, use those OEM values as your baseline in the calculator on this page.

How To Use The Wheel Interchange Calculator

  • Set Installed on (your vehicle) to 2006 Ford Fusion, then confirm the OEM fields match your door placard or manual.
  • Compare either:
    • Wheels from (donor vehicle) if you are considering a take-off or used wheel, or
    • Custom wheel size to test different rim width, diameter, and offset.
  • Adjust Custom tire size if needed. When you change rim diameter, the calculator updates tire diameter in the comparison so you can keep overall tire height in check.
  • Review inner clearance to the strut and suspension and outer poke relative to the fender. Ensure there is physical clearance at full steering lock and through suspension travel.
  • The calculator helps visualize differences. Final verification should include real-world measurements on your car and checking with OEM service data.

Fitment Checklist Before You Buy

  • Bolt pattern match: The wheel must be 5x114.3. Do not force-fit other patterns.
  • Center bore: Vehicle hub is 63.4 mm. A wheel with a larger center bore can be hub-centered using 63.4 mm hub-centric rings. A smaller bore will not fit.
  • Offset and width: Use the calculator to compare inner clearance and outer position versus your OEM 16x6.5 ET40 baseline. Confirm brake caliper, strut, spring, and fender clearance.
  • Backspacing: OEM reference is 4.82 in. Changing width or offset alters backspacing and inner clearance.
  • Brake clearance: Test-fit to ensure spoke and barrel clear the front calipers and rear brakes.
  • Lug hardware: Thread size is M12 x 1.5. Seat type must match the wheel design. Do not mix cone-seat, ball-seat, or mag-seat hardware.
  • Hub-centric vs lug-centric: For vibration-free results, center the wheel on the hub. Use rings if the wheel bore is larger than 63.4 mm.
  • Load and speed ratings: Tires and wheels must meet or exceed the vehicle’s OEM load index and speed rating found on your door placard.
  • TPMS: If your Fusion is equipped with TPMS, confirm sensor compatibility and re-learn procedures before mounting tires.
  • Stud engagement: Lug nuts must fully engage the studs without bottoming out. Replace damaged studs or nuts.
  • Overall diameter: Keep overall tire diameter close to stock to protect ABS, speedometer accuracy, and gearing feel. Use the calculator to evaluate changes.

Plus Sizing And Common Upgrades

Many owners explore Plus 1 or Plus 2 wheel upgrades. The right choice depends on brake clearance, desired handling, and ride quality. Because widths and offsets vary by wheel model, use the calculator to compare each candidate against your OEM 16x6.5 ET40 baseline and verify clearances on the car.

  • Plus 1 approach: Move to a larger rim diameter while choosing a tire with a lower aspect ratio so overall diameter stays close to stock. The calculator will show you the resulting tire diameter as you adjust sizes.
  • Plus 2 approach: Similar process but more aggressive. Carefully review inner clearance to suspension and outer fender clearance, and confirm turning and compression clearance.
  • Ride and protection: Lower-profile tires improve steering response but reduce pothole protection. Consider local road conditions when selecting sidewall height.

If you are unsure which sizes your specific trim will accept, consult a Ford dealer with your VIN and test-fit before mounting tires.

Installation Tips

  • Inspect and clean: Wire-brush the hub face to remove rust and debris. A clean, flat mounting surface prevents vibration.
  • Hub-centric rings: If the wheel bore is larger than 63.4 mm, install rings sized 63.4 mm to your wheel’s bore to center the wheel.
  • Lug seats and hardware: Use the correct seat type for the wheel. Do not reuse OEM nuts if the new wheel requires a different seat.
  • Torque: Install lug nuts dry unless the manufacturer specifies otherwise. Hand start all nuts, snug in a crisscross pattern, lower the vehicle, then torque to the Ford OEM specification in your owner’s manual. Re-torque after 50 to 100 miles.
  • Clearance check: After mounting, turn lock to lock and compress the suspension over a bump to ensure there is no rubbing.
  • TPMS: If equipped, install compatible sensors and perform the relearn procedure per Ford service information.

Tools And Helpful Supplies

FAQs

  • What wheels fit a 2006 Ford Fusion?

    Start with the OEM baseline shown above: 5x114.3 bolt pattern, 63.4 mm center bore, and M12 x 1.5 threads. Many aftermarket wheels can fit when width and offset are chosen to maintain proper inner and outer clearance. Use the calculator to compare candidates to the OEM 16x6.5 ET40 reference and verify clearances on the vehicle.

  • Can I use a 5x115 or 5x112 wheel on this car?

    No. Do not mix bolt patterns. The 2006 Fusion requires 5x114.3. Using a different pattern risks improper seating, vibration, and stud failure.

  • Do I need hub-centric rings?

    If your wheel’s center bore is larger than 63.4 mm, use rings sized 63.4 mm to your wheel bore to center the wheel and reduce vibration. If the wheel’s bore is smaller than 63.4 mm, it will not fit the hub.

  • What lug nuts should I use?

    Thread size is M12 x 1.5. The seat type must match the wheel design, such as conical or ball seat. Never use a seat type that does not match the wheel, and ensure full thread engagement.

  • How do I choose tire sizes when I go to 17 or 18 inch wheels?

    Use the calculator’s Custom wheel size and Custom tire size to keep overall tire diameter close to stock while adjusting width and aspect ratio. Verify clearance on the car at full steering lock and over bumps. Consult OEM sources if unsure.

  • Will my brakes clear a different wheel?

    Spoke shape and barrel profile vary by wheel. Always test-fit the front wheels to confirm caliper and barrel clearance before mounting tires. Use the calculator to predict inner clearance, then physically verify.

  • What lug nut torque should I use?

    Follow the torque specification in the 2006 Ford Fusion owner’s manual or Ford service documentation. If you do not have access to the spec, contact a Ford dealer. Re-torque after 50 to 100 miles.

  • Do I have TPMS on a 2006 Fusion?

    Equipment can vary. Check your owner’s manual or look for a TPMS indicator during key-on. If equipped, use compatible sensors and perform the relearn procedure after installation.

Methodology and sources

Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:

  • Bolt pattern / PCD
  • Center bore direction (donor wheel bore must not be smaller than the hub)
  • Wheel diameter, width, and offset against known OEM ranges
  • Lug thread / hardware differences (vehicle-side hardware)

A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.

Nick Marchenko

Automotive Expert