2013 Audi A7 Wheel Interchange

OEM wheel and tire fitment specs for the 2013 Audi A7, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.

Recorded OEM specifications for the 2013 Audi A7, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.

Start a donor comparison

Save these wheel specs to your Ownery garage

2013 Audi A7 Fitment Specs

Baseline mounting dimensions used for interchange decisions.

Bolt Pattern5x112
Center Bore66.5 mm
Lug ThreadM14 x 1.5 View M14 x 1.5 options on Amazon
OEM Wheel Sizes17" – 21"
OEM Widths7" – 9"
OEM Offset Range25 mm – 37 mm

Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.

Center-bore records disagree: year-level hub 66.6 mm vs trim range 66.5–66.5 mm. Interchange below does not treat this as an unqualified match.

Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.

Explore wheels at Tire Rack

Selected size: 19 × 8.5″ · ET +32

Showing matching bolt patterns and offsets up to 20 mm lower. Confirm center bore, load rating, and clearance at Tire Rack.

We may earn a commission when you buy through these links. Prices and availability may change.

Donor vehicles with overlapping OEM specs

These are vehicle-year records whose recorded OEM ranges overlap this 2013 Audi A7. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.

Evaluated 188 donor years. Listed 24 eligible overlaps (not all evaluated years are compatible). Showing all listed.

2012, 2014–2019, 2021–2022 Audi A7

Check wheel configurationCenter-bore records disagree

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2012
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019
  • 2021
  • 2022
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Center-bore records disagree (target year-level hub 66.6 mm vs trim range 66.5–66.5 mm; donor year-level hub 66.6 mm vs trim range 66.5–66.5 mm). Unqualified overlap is not claimed until the conflict is resolved.

2023 Audi A7

Insufficient dataCenter-bore records disagree
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryNot fully recorded

Wheel width/offset data is incomplete.

2019, 2021–2022 Audi e-tron

Check wheel configurationCenter-bore records disagree

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2019
  • 2021
  • 2022
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.6 mm donor vs hub 66.5 mm
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Dataset suggestionHub-centric rings ≈ 66.6 → 66.5 mm – not a verified installation requirement.

Hub-centric rings of about 66.6 → 66.5 mm mm may be relevant if the wheel bore is larger than the hub; they cannot enlarge a smaller bore. Approximate position vs the mid OEM package: outer change -3 mm, inner change 3 mm. This uses aggregated width/offset ranges, not a specific wheel.

2007–2014 Audi A4

Check wheel configurationCenter-bore records disagree

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2007
  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryOutside recorded OEM envelope

Dataset suggestionWheel spacer ≈ 14.35 mm – not a verified installation requirement.

A spacer of about 14.35 mm is a dataset suggestion only; clearance is not verified. Estimated outer position is about 14.35 mm farther inward than the mid OEM package.

2009–2011 Audi S4

Check wheel configurationCenter-bore records disagree

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • 2009
  • 2010
  • 2011
  • Bolt pattern5x112 · Same recorded PCD
  • Center bore66.5 mm · same recorded hub figure
  • Wheel geometryOutside recorded OEM envelope

Dataset suggestionWheel spacer ≈ 10 mm – not a verified installation requirement.

A spacer of about 10 mm is a dataset suggestion only; clearance is not verified. Estimated outer position is about 10 mm farther inward than the mid OEM package.

Audi A7 Years With Compatible Wheels

Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.

Will Wheels From Another Vehicle Fit?

Compare a donor vehicle or custom wheel against this 2013 Audi A7. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.

Compare

Compare wheel compatibility between two vehicles

Wheels from (donor vehicle)

Installed on (your vehicle)

Selected Car:

2013 Audi A7

Compare Rims

Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x112
Center Bore
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
66.5 mm
Thread Size
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M14 x 1.5
Rim Diameter
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
19"
Rim Width
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
8.5"
Wheel Offset
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
32 mm
Backspacing
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-

Wheel Fitment Parts for the 2013 Audi A7

Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.

Lug Nuts / Wheel Bolts

M14 x 1.5

As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.

Understanding Wheel Fitment for the 2013 Audi A7

When it comes to fitting new wheels on your 2013 Audi A7, there’s a common misconception that any wheel will fit if it has the same bolt pattern. Let's clarify this a bit.

Misconception

Many car enthusiasts believe that as long as the bolt pattern matches, they can choose any wheel for their vehicle.

Why it Seems True

This idea makes sense at first glance. After all, the bolt pattern is a critical measurement for wheel compatibility. If the studs fit, shouldn’t the wheel be good to go? Unfortunately, it’s not that simple.

What is True

While the 2013 Audi A7 does have a bolt pattern of 5x112, there are other vital specifications to consider. The center bore, offset, and rim width also play significant roles in ensuring a proper fit. For instance, the center bore for this model is 66.6 mm, and the offset is 32 mm. Ignoring these factors can lead to fitment issues or even safety risks.

Implications

Choosing wheels without considering the complete specifications can lead to misalignment, uneven tire wear, or worse, compromised handling. It's essential to ensure that every measurement aligns with your vehicle's requirements. This means not just focusing on the bolt pattern but also on the wheel's offset and other dimensions.

Quick Tests

To make sure you're on the right track:

  • Check the bolt pattern: For the Audi A7, it should be 5x112.
  • Verify the center bore: It should be 66.6 mm.
  • Look at the offset: The ideal offset is 32 mm.
  • Ensure the rim width: It should be 8.5 inches.

To further assist you, consider using the wheel fitment calculator on our site. This tool lets you compare potential wheels and customize sizes to see what will work best for your A7.

Additional Resources

If you're looking for tools or parts to aid in your wheel change, you might find these links helpful:

By taking the time to understand wheel fitment, you'll not only enhance your Audi A7's performance but also ensure your safety on the road. Happy driving!

Methodology and sources

Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:

  • Bolt pattern / PCD
  • Center bore direction (donor wheel bore must not be smaller than the hub)
  • Wheel diameter, width, and offset against known OEM ranges
  • Lug thread / hardware differences (vehicle-side hardware)

A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.

Nick Marchenko

Automotive Expert