2021 Audi TT RS Wheel Interchange

OEM wheel and tire fitment specs for the 2021 Audi TT RS, including bolt pattern (PCD), center bore diameter, thread size, rim diameter, rim width, wheel offset, and backspacing.

Recorded OEM specifications for the 2021 Audi TT RS, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.

Start a donor comparison

2021 Audi TT RS Fitment Specs

Baseline mounting dimensions used for interchange decisions.

Bolt Pattern5x112
Center Bore57.1 mm
OEM Wheel Sizes19" – 20"
OEM Widths8" – 9"
OEM Offset Range52 mm

Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.

Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.

Donor vehicles with overlapping OEM specs

These are vehicle-year records whose recorded OEM ranges overlap this 2021 Audi TT RS. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.

Evaluated 133 donor years. Listed 24 eligible overlaps (not all evaluated years are compatible). Showing all listed.

2012–2013, 2018–2020 Audi TT RS

OEM specs overlapOEM ranges overlap – confirm the specific wheel

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • Bolt pattern5x112 · Same recorded PCD
  • Center bore57.1 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Approximate position vs the mid OEM package: outer change 6.35 mm, inner change 6.35 mm. This uses aggregated width/offset ranges, not a specific wheel.

2007–2011 Audi S6

OEM specs overlapOEM ranges overlap – confirm the specific wheel

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • Bolt pattern5x112 · Same recorded PCD
  • Center bore57.1 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Recorded OEM bolt pattern, center bore, and width/offset ranges overlap. This is not a guarantee that every wheel from the donor year fits this vehicle.

2008–2021 Audi TT

OEM specs overlapOEM ranges overlap – confirm the specific wheel

Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.

  • Bolt pattern5x112 · Same recorded PCD
  • Center bore57.1 mm · same recorded hub figure
  • Wheel geometryOEM width/offset ranges overlap (not a specific wheel)

Recorded OEM bolt pattern, center bore, and width/offset ranges overlap. This is not a guarantee that every wheel from the donor year fits this vehicle.

Audi TT RS Years With Compatible Wheels

Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.

Will Wheels From Another Vehicle Fit?

Compare a donor vehicle or custom wheel against this 2021 Audi TT RS. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.

Compare

Compare wheel compatibility between two vehicles

Wheels from (donor vehicle)

Installed on (your vehicle)

Selected Car:

2021 Audi TT RS

Compare Rims

Specification
Wheels from
Installed on
Result (Click it)
Bolt Pattern
Bolt Pattern
The total number of bolt holes and the diameter of the circle they form.
-
5x112
Center Bore
Center Bore
The hole in the center of the wheel that fits over the vehicle’s hub.
-
57.1 mm
Thread Size
Thread Size
The size and spacing of the threads on the bolts or nuts that hold the wheel in place.
-
M14 x 1.5
Rim Diameter
Rim Diameter
The wheel diameter in inches that determines which tire sizes will fit.
-
19"
Rim Width
Rim Width
The distance between the inner edges of the wheel is measured in inches.
-
9.0"
Wheel Offset
Wheel Offset
How far the wheel sits inward or outward relative to the hub mounting surface.
-
52 mm
Backspacing
Backspacing
Shows how much space the wheel takes up toward the inside of the vehicle.
-
-
Wheel Fasteners
Wheel Fasteners
The type of hardware used to secure the wheel to the vehicle.
-
-

Wheel Fitment Parts for the 2021 Audi TT RS

Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.

Lug Nuts / Wheel Bolts

M14 x 1.5

As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.

Tl;dr

2021 Audi TT RS OEM wheels are 19x9.0 ET52 with a 5x112 bolt pattern, 57.1 mm center bore, M14x1.5 threads, and tires 245/35R19. Use the on-page calculator to test alternative wheel widths, offsets, and tire sizes before buying.

Recommendation

Start by treating the OEM values as the baseline for fitment. Enter the OEM specs into the page calculator and compare any donor or aftermarket wheels there first. If you change rim width or offset, simulate tire sizes with the calculator to check clearance and overall diameter.

OEM specValue
Bolt pattern5x112
Center bore57.1 mm
Thread sizeM14 x 1.5
Rim diameter19 in
Rim width9.0 in
Offset (ET)52 mm
Backspacing6.55 in
Tire245/35R19

Use OEM values to source compatible wheels or to size adapters/spacers correctly.

Impact

Changing width or offset affects track width, steering feel, and suspension clearance. Larger overall diameter changes speedometer accuracy and gearing feel. Center bore mismatch can cause vibration unless using proper hub-centric rings. Incorrect lug threads or seat type can be dangerous.

Risks

  • Rubbing on fenders, control arms, or strut boots when offset or width changes.
  • TPMS sensor incompatibility or need for reprogramming with aftermarket wheels.
  • Using incorrect lug nuts or bolts with different thread size or seat profile.
  • Vibration from non hub-centric fitment without rings or proper centering.
  • Brake caliper clearance issues with deep-dish or wider wheels.

Next actions

Checklist for a quick, safe workflow.

  • Confirm trim-specific values. Some trims may vary. Check owner’s manual or dealer VIN lookup.
  • Open the on-page calculator. Enter the OEM specs above and compare proposed wheels or tires.
  • Simulate changed rim width, offset, and tire size to check clearance and diameter.
  • Verify lug thread and seat type. Your TT RS uses M14 x 1.5 threads; confirm seat profile before buying hardware.
  • Plan for hub-centric rings if center bore differs from 57.1 mm.
  • Order compatible TPMS sensors or confirm reuse of OEM sensors.
  • Have wheels installed and torqued to manufacturer spec using a calibrated torque wrench. Confirm torque value in the manual.
  • After install, perform a road test and alignment check. Inspect for rubbing and re-torque lug nuts after 50 miles.

Gotchas: If a spec is not listed for your exact trim, confirm via the calculator or OEM documentation before purchase.

Tools: a good torque wrench is essential. Example search for options: torque wrench.

Next steps: run your desired wheel/tire combination in the on-page calculator now. Then follow the checklist to validate and install safely.

Methodology and sources

Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:

  • Bolt pattern / PCD
  • Center bore direction (donor wheel bore must not be smaller than the hub)
  • Wheel diameter, width, and offset against known OEM ranges
  • Lug thread / hardware differences (vehicle-side hardware)

A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.

Nick Marchenko

Automotive Expert