Recorded OEM specifications for the 2021 Ford Edge, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.
Baseline mounting dimensions used for interchange decisions.
Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.
Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.
These are vehicle-year records whose recorded OEM ranges overlap this 2021 Ford Edge. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.
Evaluated 75 donor years. Listed 24 eligible overlaps (not all evaluated years are compatible). Showing all listed.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Approximate position vs the mid OEM package: outer change -2.18 mm, inner change -4.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Lug thread is not fully recorded for this comparison. Hardware must match the 2021 Ford Edge studs and the selected wheel’s seat. Unknown hardware is not a match.
Bolt pattern data is incomplete for a full interchange decision.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Recorded vehicle-side thread for the 2021 Ford Edge is M14x1.5. This donor year is recorded as 1/2"-20UNF. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.
Donor width/offset sits outside the known OEM envelope for this vehicle. Precomputed data suggested a spacer; geometry was re-checked against OEM envelope. Recorded vehicle-side thread differs (1/2"-20UNF on the donor year vs M14x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset.
Approximate position vs the mid OEM package: outer change -4.18 mm, inner change -2.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Approximate position vs the mid OEM package: outer change -2.18 mm, inner change -4.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Approximate position vs the mid OEM package: outer change -4.18 mm, inner change -2.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Recorded vehicle-side thread for the 2021 Ford Edge is M14x1.5. This donor year is recorded as M12x1.5. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.
View M14 x 1.5 options on Amazon – thread match only; seat style is not verified.
Recorded vehicle-side thread differs (M12x1.5 on the donor year vs M14x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset. Approximate position vs the mid OEM package: outer change -2.18 mm, inner change -4.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Recorded vehicle-side thread for the 2021 Ford Edge is M14x1.5. This donor year is recorded as M12x1.5. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.
View M14 x 1.5 options on Amazon – thread match only; seat style is not verified.
Recorded vehicle-side thread differs (M12x1.5 on the donor year vs M14x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset. Approximate position vs the mid OEM package: outer change -4.18 mm, inner change -2.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Recorded vehicle-side thread for the 2021 Ford Edge is M14x1.5. This donor year is recorded as M12x1.5. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.
View M14 x 1.5 options on Amazon – thread match only; seat style is not verified.
Recorded vehicle-side thread differs (M12x1.5 on the donor year vs M14x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset. Approximate position vs the mid OEM package: outer change -4.18 mm, inner change -2.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.
Compare a donor vehicle or custom wheel against this 2021 Ford Edge. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.
Compare wheel compatibility between two vehicles
2021 Ford Edge
Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.
M14 x 1.5
M14 x 1.5 · Thread match only; seat style is not verified
View on Amazon →
M14 x 1.5 · Thread match only; seat style is not verified
View on Amazon →
M14 x 1.5 · Thread match only; seat style is not verified
View on Amazon →As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.
The following specifications are the known OEM fitment values supplied for the 2021 Ford Edge. They may vary by trim, package, or wheel configuration, so confirm the vehicle-specific information in the owner’s manual, the driver-door tire and loading label, and Ford parts documentation before purchasing wheels or tires.
| Specification | Known value |
|---|---|
| Bolt pattern | 5x108 |
| Center bore | 63.4 mm |
| Thread size | M14 x 1.5 |
| Rim diameter | 18 inches |
| Rim width | 8.0 inches |
| Wheel offset | ET53 mm |
| Backspacing | 6.09 inches |
| Tire section width | 245 mm |
| Tire aspect ratio | 60 percent |
| Tire rim diameter | R18 |
These values describe the supplied reference fitment and do not by themselves confirm brake clearance, suspension clearance, load rating, tire clearance, or compatibility with every 2021 Ford Edge trim. Use the calculator and verify the complete wheel and tire specifications before installation.
Use the wheel interchange calculator on this page to compare a donor vehicle’s wheels with the wheels intended for your 2021 Ford Edge. Enter the donor information under “Wheels from” and the Ford Edge information under “Installed on.” The comparison helps identify differences in bolt pattern, center bore, wheel width, diameter, offset, and related tire dimensions when those values are available.
You can also select “Custom wheel size” to enter a wheel’s rim diameter, rim width, and offset. Select “Custom tire size” to enter the tire section width and aspect ratio. When you change the rim diameter, the calculator updates the tire diameter shown in the comparison. This is useful for reviewing potential plus-size configurations, but it is not a substitute for checking load capacity, clearance, speedometer effects, vehicle electronics, and manufacturer recommendations.
Use the calculator as a screening tool, then confirm the exact wheel part number, tire size, vehicle trim, and OEM requirements with Ford or a qualified tire and wheel professional.
Confirm every item below before ordering a wheel or tire package:
Plus sizing generally changes the wheel diameter while reducing tire sidewall height so the overall tire diameter remains close to the original. The calculator can illustrate how custom rim diameter, rim width, offset, section width, and aspect ratio affect the comparison.
Do not choose a larger wheel based on diameter alone. A wider wheel or a different offset can move the inner or outer wheel edge and create interference. A lower-profile tire may also provide less protection from pothole damage and may change ride comfort. Confirm the tire manufacturer’s approved rim-width range and the vehicle manufacturer’s recommended tire specifications.
The supplied OEM reference uses an 18-inch rim, an 8.0-inch rim width, ET53 offset, and a 245/60R18 tire description. This should not be treated as a complete list of approved configurations for every trim. Confirm any alternative size through Ford documentation, the vehicle label, and the calculator before purchase.
Have the wheel and tire assembly installed by a qualified technician when possible. Before mounting, compare the new wheel with the original wheel and inspect the mounting face, center bore, bolt holes, wheel hardware, and valve stem area.
Install only hardware with the correct thread size, seat design, length, and strength for the selected wheel. Start each fastener by hand to avoid cross-threading. Tighten the fasteners in a star pattern and use the vehicle or wheel manufacturer’s specified torque procedure. Do not substitute a guessed torque value.
After installation, verify tire pressure using the vehicle’s required cold-pressure specification. Check that the wheel rotates freely and that there is no contact with the brake, suspension, steering, or bodywork. Recheck fastener torque after the initial driving period according to the wheel manufacturer’s instructions, and recalibrate or relearn the TPMS system as required.
Useful equipment includes a calibrated torque wrench, a suitable socket set, a tire pressure gauge, a tread-depth gauge, and a hub and wheel mounting-surface cleaning brush. A wheel fitment gauge or careful clearance inspection can help identify interference, but it does not replace a complete professional inspection.
Shop automotive torque wrenches on Amazon
Shop digital tire pressure gauges on Amazon
Use wheel chocks and appropriate vehicle-support equipment when removing wheels. Never work under a vehicle supported only by a jack.
The supplied OEM reference lists a 5x108 bolt pattern. Confirm the exact vehicle and wheel application before purchase because bolt pattern alone does not establish complete fitment.
The supplied center bore is 63.4 mm. A replacement wheel with a smaller center bore will not fit over the hub. A larger bore may require properly sized hub-centric rings if recommended for that wheel application.
The supplied reference lists ET53 mm. Offset changes the wheel’s position relative to the suspension and fender, so a different offset must be checked for inner and outer clearance rather than accepted based on bolt pattern alone.
Use the calculator to compare the donor wheel with the Ford Edge. The donor wheel must be checked for bolt pattern, center bore, thread and hardware compatibility, diameter, width, offset, load rating, brake clearance, and tire compatibility. The calculator does not guarantee that a donor wheel is safe or approved.
Yes. In the calculator, changing the custom rim diameter updates the tire diameter in the comparison. You must still select a tire size that meets the vehicle’s requirements and has the correct load index, speed rating, clearance, and approved rim-width range.
The supplied reference lists a 245 mm section width, a 60 percent aspect ratio, and an 18-inch tire rim diameter, commonly represented as 245/60R18. Verify the door-jamb label and OEM documentation for the exact trim and axle configuration before ordering.
Possibly. The supplied vehicle thread size is M14 x 1.5, but the required fastener seat type, length, and design depend on the wheel. Confirm hardware compatibility with the wheel manufacturer and never force mismatched fasteners.
No. The listed values are the known reference data provided for this page and may be partial or trim-dependent. Confirm the vehicle label, owner’s manual, Ford parts information, wheel part number, and tire manufacturer data before purchase or installation.
Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:
A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.
