Recorded OEM specifications for the 2020 Ford Transit Connect, donor years with overlapping ranges, and a calculator to compare a selected wheel. Range overlap is not a guaranteed fit.
Baseline mounting dimensions used for interchange decisions.
Multiple OEM configurations exist for this vehicle. Fitment can vary by trim, brakes, and factory wheel package – confirm your exact setup before buying.
Thread-only product links are shopping examples, not verified fits. Seat style is not confirmed here. As an Amazon Associate we earn from qualifying purchases.
These are vehicle-year records whose recorded OEM ranges overlap this 2020 Ford Transit Connect. Overlap is not a guarantee that a specific wheel will install. Selected-wheel comparison is in the calculator below.
Evaluated 75 donor years. Listed 24 eligible overlaps (not all evaluated years are compatible). Showing all listed.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Approximate position vs the mid OEM package: outer change -3.18 mm, inner change -3.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Recorded vehicle-side thread for the 2020 Ford Transit Connect is M14x1.5. This donor year is recorded as M12x1.5. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.
View M14 x 1.5 options on Amazon – thread match only; seat style is not verified.
Recorded vehicle-side thread differs (M12x1.5 on the donor year vs M14x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset. Approximate position vs the mid OEM package: outer change -3.18 mm, inner change -3.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Lug thread is not fully recorded for this comparison. Hardware must match the 2020 Ford Transit Connect studs and the selected wheel’s seat. Unknown hardware is not a match.
Bolt pattern data is incomplete for a full interchange decision.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Recorded vehicle-side thread for the 2020 Ford Transit Connect is M14x1.5. This donor year is recorded as M12x1.5. That is the vehicle stud/nut thread, not an intrinsic thread stamped on the wheel. Hardware must match this vehicle’s studs and the selected wheel’s seat and engagement. Existing hardware may be reusable if it already matches. Seat style is not in this dataset, so products are not a verified fit.
Center-bore records disagree (donor year-level hub 63.3 mm vs trim range 63.4–63.4 mm). Unqualified overlap is not claimed until the conflict is resolved. Recorded vehicle-side thread differs (M12x1.5 on the donor year vs M14x1.5 on the target vehicle). Hardware must match the target vehicle’s studs and the selected wheel’s seat. Existing hardware may be reusable if it already matches. Seat style is not confirmed in this dataset. Approximate position vs the mid OEM package: outer change -12.52 mm, inner change -6.52 mm. This uses aggregated width/offset ranges, not a specific wheel.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Approximate position vs the mid OEM package: outer change 17.88 mm, inner change 13.88 mm. This uses aggregated width/offset ranges, not a specific wheel.
Approximate position vs the mid OEM package: outer change -3.18 mm, inner change -3.18 mm. This uses aggregated width/offset ranges, not a specific wheel.
Years grouped because recorded compatibility evidence is equivalent. Each year keeps its own page.
Approximate position vs the mid OEM package: outer change 5.18 mm, inner change 1.17 mm. This uses aggregated width/offset ranges, not a specific wheel.
Only years with evidence-based interchange relationships are listed. Adjacent years are not assumed compatible.
Compare a donor vehicle or custom wheel against this 2020 Ford Transit Connect. Use Compare in calculator on a donor row above to fill the donor side of this same calculator.
Compare wheel compatibility between two vehicles
2020 Ford Transit Connect
Example products matched to recorded thread, hub, or spacer dimensions. They are not verified fits. Confirm seat style, thickness, and clearance before ordering.
M14 x 1.5
M14 x 1.5 · Thread match only; seat style is not verified
View on Amazon →
M14 x 1.5 · Thread match only; seat style is not verified
View on Amazon →
M14 x 1.5 · Thread match only; seat style is not verified
View on Amazon →As an Amazon Associate we earn from qualifying purchases. Product availability and pricing may change.
The following specifications are the known fitment data available for the 2020 Ford Transit Connect. Confirm the exact wheel and tire requirements for your vehicle using the door-jamb label, owner’s manual, VIN-specific Ford service information, and the on-page calculator before purchasing parts.
| Specification | Known value |
|---|---|
| Bolt pattern, studs x PCD | 5x108 |
| Center bore | 63.4 mm |
| Thread size | M12 x 1.5 |
| Rim diameter | 17 inches |
| Rim width | 7.0 inches |
| Wheel offset | ET50 |
| Backspacing | 5.47 inches |
| Tire section width | 215 mm |
| Tire aspect ratio | 55% |
| Tire rim diameter listed in the available data | R16 |
The supplied data lists a 17-inch rim diameter and a tire rim diameter of R16. Because these values do not match, do not assume a complete original wheel and tire package from this table. Confirm the correct tire size and wheel diameter for your specific Transit Connect before ordering or mounting tires.
Use the on-page calculator to compare wheels from a donor vehicle with wheels installed on your 2020 Ford Transit Connect. Enter the donor vehicle information in the “Wheels from (donor vehicle)” area and your Transit Connect information in the “Installed on (your vehicle)” area.
The calculator is a comparison aid, not a substitute for physical clearance checks, load-rating verification, tire manufacturer guidance, or Ford service information.
Plus sizing changes wheel diameter while using a lower-profile tire to maintain a similar overall tire diameter. The goal is not simply to install the largest wheel that fits. The replacement tire must maintain adequate load capacity, provide safe clearance, and remain compatible with the vehicle’s suspension and electronic systems.
Use the calculator to compare custom wheel diameter, width, and offset, then enter the proposed tire section width and aspect ratio. Review the calculated diameter change before purchasing. A substantial diameter difference can affect speedometer readings, clearance, ride quality, gearing, and traction-control or anti-lock braking behavior.
Wider wheels and tires can improve steering response but may increase road noise, impact harshness, curb damage risk, and the chance of contact with suspension or body components. Do not treat a calculator result as confirmation of brake or fender clearance. Test-fit one wheel when possible and inspect all clearances with the steering turned and the suspension loaded.
Useful installation supplies can include a calibrated torque wrench, suitable socket, jack and jack stands rated for the vehicle, wheel chocks, a tire-pressure gauge, and a tread-depth gauge. Follow the vehicle owner’s manual for safe lifting points and never work under a vehicle supported only by a jack.
For convenience, you can search Amazon for a automotive torque wrench or a digital tire pressure gauge. Confirm the tool’s range and suitability before purchase.
What is the bolt pattern for the 2020 Ford Transit Connect?
The known bolt pattern is 5x108. Verify the donor wheel specification before buying because a wheel with a different pattern is not a direct bolt-on fit.
What is the center bore?
The known center bore is 63.4 mm. A wheel bore smaller than the vehicle hub will not fit. A larger bore may need properly sized hub-centric rings if permitted by the wheel manufacturer.
What wheel offset is listed?
The available fitment data lists ET50. Offset affects the wheel’s position relative to the suspension and fender, so compare any proposed offset in the calculator and perform a physical clearance inspection.
Can I install any 5x108 wheel?
No. Bolt pattern is only one part of fitment. You must also verify center bore, wheel width, diameter, offset, brake clearance, load rating, mounting hardware, and tire compatibility.
Why does the fitment information show both 17 inches and R16?
The supplied data lists a 17-inch rim diameter and a tire rim diameter of R16. These values conflict, so the correct wheel and tire package must be confirmed using the vehicle placard, owner’s manual, VIN-specific OEM information, and the tire markings currently fitted to the vehicle.
How do I compare a donor vehicle’s wheels?
Enter the donor specifications under “Wheels from (donor vehicle)” and the Transit Connect specifications under “Installed on (your vehicle).” Compare bolt pattern, center bore, diameter, width, and offset, then verify tire diameter and physical clearances before purchase.
Does changing wheel diameter change tire diameter?
The calculator updates the tire diameter comparison when you change rim diameter. Select a compatible tire size for the new wheel and confirm the final diameter, load rating, clearance, and OEM requirements before installation.
What thread size is listed for the wheel hardware?
The known thread size is M12 x 1.5. The wheel nut seat must also match the replacement wheel, so use the wheel manufacturer’s hardware requirements rather than relying on thread size alone.
Wheel interchange depends on more than bolt pattern. Where data is available, this site compares recorded OEM values:
A normal wheel spacer does not change bolt pattern. Hub rings cannot enlarge a wheel bore that is smaller than the hub. Brake clearance and tire package fitment still require vehicle-specific checks when not confirmed in the dataset.
