2023 Dodge Charger Wheel Interchange

2023 Dodge Charger Wheel Fitment And Interchange Guide | wheelinterchange.com

Known OEM Fitment For 2023 Dodge Charger

This page focuses on safe, verifiable fitment for the 2023 Dodge Charger. Some specifications vary by trim and brake package. Where values are unknown, use the on-page calculator and confirm with OEM sources such as the owner’s manual, door-jamb tire placard, Mopar parts catalog, or a Dodge dealer by VIN.

Important: Larger brake packages typically need wheels with larger inner diameter and spoke clearance. Always test-fit to ensure caliper clearance.

How To Use The Wheel Interchange Calculator

The calculator on this page compares “Wheels from (donor vehicle)” to those “Installed on (your vehicle).” It also lets you try a custom wheel and tire size. Follow these steps:

• Start with your current setup. Enter the wheel diameter, width, and offset, plus your tire size (section width and aspect ratio). If you don’t know them, read the tire sidewall and check the wheel casting marks inner barrel/spokes, owner’s manual, or door-jamb placard.
• Choose a donor vehicle or enter a Custom wheel size. Adjust rim diameter, width, and offset. The tool will instantly show inner clearance to suspension/brakes and outer “poke” relative to your fenders.
• Set a Custom tire size. When you change rim diameter, the calculator updates tire overall diameter so you can keep the rolling radius close to stock and minimize speedometer error.
• Watch the comparison outputs:
  • Inner clearance: Ensure no contact with struts, control arms, brake lines, or liners under full lock and compression.
  • Outer position: Confirm the tire won’t rub fender lips or liners through bumps and steering.
  • Overall tire diameter difference: Keep the change small to protect ABS, traction control, and speedometer accuracy.
• When satisfied, physically test-fit one wheel on the 2023 Charger before mounting tires, and re-check caliper spoke and barrel clearance.

Fitment Checklist Before You Buy

• Bolt pattern: Wheel must be 5x115. Avoid 5x114.3 unless using manufacturer-approved solutions; off-pattern fits can cause vibration and stud stress.
• Center bore: The Charger hub is 71.6 mm. Use hub-centric wheels or quality hub-centric rings sized to 71.6 mm at the hub and your wheel’s larger bore.
• Studs and lug nuts: Vehicle uses M14 x 1.5 studs. Match thread and seat type. Do not reuse damaged or stretched hardware.
• Offset and width: Use the calculator to confirm inner clearance to struts/brakes and outer position relative to fenders. Offset changes move the wheel ~1 mm per 1 mm offset change.
• Brake clearance: Brembo and performance packages may need more spoke and barrel room. Spin the wheel by hand during test-fit to ensure no contact.
• Tire overall diameter: Keep diameter change modest to limit speedometer and ABS impact. The calculator shows the difference.
• TPMS: Plan to transfer sensors or install compatible replacements. Some sensors need relearn or programming; confirm by VIN with OEM documentation.
• Load rating: Wheels and tires must meet or exceed the Charger’s axle and GVWR requirements. Check wheel load stamps and tire load index.
• Spacers (if used): Choose hub-centric spacers with 71.6 mm bore and 5x115 pattern. Ensure sufficient thread engagement or use longer, high-quality studs. Recalculate offset and clearance in the tool.

Plus Sizing And Common Upgrades

Because factory wheel and tire sizes vary by 2023 Charger trim and brake package, there isn’t a single “right” upgrade. Use this process instead of guessing:

• Identify your stock reference. Read your current tire size and wheel specs and enter them as the “Installed on (your vehicle)” baseline.
• Explore larger or wider wheels in the Custom wheel size fields. Maintain inner clearance to suspension and brakes using the calculator’s inner clearance output.
• Adjust offset to center the wheel. Increasing positive offset pulls the wheel inward; decreasing pushes it outward. Re-check both inner and outer clearances.
• Choose a tire size that keeps overall diameter close to stock. The calculator will update the diameter and show the difference so you can target a small change.
• Verify brake and fender clearance with a real test-fit before mounting tires, especially on vehicles with performance brake packages.

Installation Tips

• Clean the hub face and wheel mounting pad until bare metal for true seating. Remove rust and debris.
• If using hub-centric rings, seat them fully on the hub and verify snug fit in the wheel.
• Hand-start all lug nuts to avoid cross-threading. Tighten in a star pattern with a calibrated torque wrench to the value in your owner’s manual.
• Check that the wheel freely clears calipers and suspension by rotating it by hand before lowering the car.
• Inflate tires to the pressure on the driver door placard unless otherwise specified for your tire application.
• Re-torque lug nuts after a short break-in period following the first drives.

Tools And Helpful Supplies

• 1/2 inch torque wrench
• M14x1.5 lug nuts (match seat type to wheel)
• Hub-centric rings 71.6 mm (wheel-bore to 71.6 mm)
• Digital tire pressure gauge

FAQs

• What is the bolt pattern on the 2023 Dodge Charger?

  The Charger uses a 5x115 bolt pattern.

• What center bore do I need for hub-centric fit?

  The hub bore is 71.6 mm. If your wheel’s bore is larger, use quality hub-centric rings sized to 71.6 mm at the hub.

• Which lug nuts fit the 2023 Charger?

  The studs are M14 x 1.5. Match the lug nut seat style to the wheel (conical/tuner/spherical) and use a torque wrench to the value in the owner’s manual.

• What wheel offset and tire size are stock?

  These vary by trim and brake package. Check the driver door tire placard, owner’s manual, or OEM parts lookup by VIN, and use the calculator to compare any changes.

• Will larger wheels clear my brakes?

  Not always. Caliper design and rotor size matter. Use the calculator to check inner barrel and spoke clearance, then test-fit a wheel on the car before mounting tires.

• Can I use 5x114.3 wheels with wobble bolts or adapters?

  Mixing patterns is not recommended for safety and vibration reasons. Use correct 5x115 wheels or professionally engineered hub-centric adapters that maintain 71.6 mm hub and correct hardware, then re-check all clearances.

• Do I need new TPMS sensors?

  You can often transfer OEM sensors if compatible with the new wheels. If buying new sensors, verify part numbers and frequency by VIN. A relearn or programming procedure may be required.

• How close should my new tire diameter be to stock?

  Keep the overall diameter change small to protect ABS, traction control, and speedometer accuracy. The calculator shows the difference so you can target a minimal change.

Use the on-page calculator and OEM sources to finalize selections for your 2023 Dodge Charger. When in doubt, measure carefully and test-fit before mounting tires.